Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

header-navigation
keyboard_arrow_up
close
keyboard_arrow_left
list Table of Contents
file_download PDF
{ "lLangCode": "en", "lName": "English", "lCountryCode": "us", "transcode": "en_US" }
English
keyboard_arrow_right

Optical Transceivers Probe

Release: Juniper Apstra 4.1
{}
Change Release
date_range 16-Jan-25

The Optical Transceivers probe is supported on Juniper and Arista. The Optical Transceivers probe (introduced in Apstra version 4.1.0) monitors optical statistics based on the following telemetry data:

  • Temperature C) of the physical port (interface stats)

  • Voltage (V) of the physical port (interface stats)

  • Transmit Power Level (dBm) of each optical lane (lane stats)

  • Receive Power Level (dBm) of each optical lane (lane stats)

  • Transmit Bias (mA) of each optical lane (lane stats)

If telemetry data falls outside the specified range for the specified amount of time, a warning or alarm is raised, as applicable.

In Apstra versions 4.1.0 and 4.1.1, the reason for a warning or alarm is not specified.

In Apstra version 4.1.2, warnings and alarms specify whether the value causing the anomaly was too high or too low.

For more information about this probe, from the blueprint, navigate to Analytics > Probes, click Create Probe, then select Instantiate Predefined Probe from the drop-down list. Select the probe from the Predefined Probe drop-down list to see details specific to the probe.

footer-navigation