Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
ON THIS PAGE
 

Unassign System (Freeform)

You can unassign system IDs (serial numbers) from the Systems view, the Topology view, or from the Device panel.

Unassign System(s) (from Systems View)

  1. From the blueprint, navigate to Staged > Physical > Systems and select the check box(es) for one or more systems to unassign, then click the Change System IDs assignments button.
  2. In the dialog that opens, click the Remove assignment button (trash can) for the system(s) to unassign and change the deploy mode to Undeploy.
  3. Click Update Assignments to stage your changes and return to the Systems view.
  4. Click Uncommitted and commit changes to the blueprint to remove the system from the fabric.

The device is still under Apstra management. It's ready and available to be assigned to any blueprint.

To remove the device completely from Apstra management, remove the device from Managed Devices.

Unassign System (from Topology Editor)

  1. From the blueprint, navigate to Staged > Physical > Topology and click Edit to open the topology editor.
    CAUTION:

    Be careful. If you click away from the topology editor without clicking Save, your changes are discarded.
  2. In the topology editor, click the system that you want to unassign, then click the settings button.
  3. Remove the system ID and change deploy mode to Undeploy, then click the system (or outside the settings box) to close the settings box.
  4. Click Save to stage your changes, exit the topology editor and return to the Topology view. (If you leave the page without saving, your changes are discarded.)
  5. Click Uncommitted and commit changes to the blueprint to remove the system from the fabric.

The device is still under Apstra management. It's ready and available to be assigned to any blueprint.

To remove the device completely from Apstra management, remove the device from Managed Devices.

Unassign System (from Device Panel)

  1. From the blueprint, navigate to Staged > Physical and click the name of the system to unassign, either from the Topology view or from the Systems view. The Device panel for that system appears.
    [image
  2. Click the Edit button for deploy mode, and change it to Undeploy, then click the Save button.
  3. In the S/N section, click the Edit button.
  4. Click the red square in the S/N section to unassign the system ID.
  5. Click Uncommitted and commit changes to the blueprint to remove the system from the fabric.

The device is still under Apstra management. It's ready and available to be assigned to any blueprint.

To remove the device completely from Apstra management, remove the device from Managed Devices.