Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Resolved Issues: 21.2R1

Interfaces

  • On NFX250 devices, a VNF interface is not brought down when the VNF interface is mapped to an already link down or disabled peer physical interface. PR1555193

Performance Modes

  • You cannot enable the trust mode on an SR-IOV virtual function assigned to a VNF. PR1593037
  • A message is provided in syslog if reboot is required for the mode modification to take effect in custom mode. PR1555465

Platform and Infrastructure

  • RPD core file is generated when the device reboots and daemon restarts. Daemon recovers and there is no service impact on routing protocol usage. PR1567043
  • On NFX350 devices and the SRX5000 line of devices with SPC3 card, the DPD Gateway failover feature is not supported. PR1564715
  • The l2cpd core files might be seen on reboot. PR1561235
  • On NFX150 devices, when J-Flow v5 is configured and the J-Flow v5 server is reachable through an IPsec tunnel, and the MTU size of this IPsec tunnel is configured as 1500, the J-Flow packets are not generated on NFX Series devices. As a workaround, use J-Flow v9 or IPFIX version, instead of J-Flow v5, to enable the J-Flow functionality on NFX Series devices. PR1539964
  • You can transfer file from USB to hypervisor by enabling the usb-pass-through functionality. PR1535220
  • On NFX150, NFX250 NextGen, and NFX350 devices, the EmulatorPin CPUSet option does not get configured, which might result in vCPU running on a higher level up to 100%. PR1540564
  • The DSL SFP firmware cannot finish upgrade successfully through vmhost reboot. PR1547540