- Copyright and Trademark Information
- Table of Contents
- play_arrow Overview
- play_arrow Overview of CTP Bundles
- play_arrow Configuring CTP Bundles
- Adding a Bundle (CTPView)
- Adding a Bundle (CTP Menu)
- Configuring IP Parameters for CTP Bundles (CTPView)
- Configuring IP Parameters for CTP Bundles (CTP Menu)
- Configuring Circuit Startup Parameters for CTP Bundles (CTPView)
- Configuring Circuit Startup Parameters for CTP Bundles (CTP Menu)
- Configuring the CTP Bundle Data Packet Protocol and OAM Port (CTP Menu)
- play_arrow Ethernet Media Configuration Overview
- Displaying Ethernet Media Information (CTP Menu)
- Configuring Ethernet Media (CTP Menu)
- Configuring the Direction of the Circuit (CTPView)
- Configuring the Direction of the Circuit (CTP Menu)
- Configuring Virtual IP Parameters for CTP Bundles (CTPView)
- Configuring Virtual IP Parameters for CTP Bundles (CTP Menu)
- Configuring the Missing Packet Fill Pattern for CTP Bundles (CTPView)
- Configuring the Missing Packet Fill Pattern for CTP Bundles (CTP Menu)
- Configuring Signaling for CTP Bundles (CTPView)
- Configuring Signaling for CTP Bundles (CTP Menu)
- Configuring Serial Port Parameters for CTP Bundles (CTPView)
- Configuring Serial Port Parameters for CTP Bundles (CTP Menu)
- Configuring Transparent Encoding for CTP Bundles (CTPView)
- Configuring Transparent Encoding for CTP Bundles (CTP Menu)
- Configuring T1 and E1 Port Parameters for CTP Bundles (CTPView)
- Configuring T1 and E1 Port Parameters for CTP Bundles (CTP Menu)
-
- Configuring Multiservice Audio Mode Port Parameters for CTP Bundles (CTPView)
- Configuring Multiservice IRIG-B Mode Port Parameters for CTP Bundles (CTPView)
- Configuring Multiservice TDC Mode Parameters for CTP Bundles (CTPView)
- Configuring Multiservice 4WTO Mode Port Parameters for CTP Bundles (CTPView)
-
- Configuring Multiservice Audio Mode Port Parameters for CTP Bundles (CTP Menu)
- Configuring Multiservice IRIG-B Mode Port Parameters for CTP Bundles (CTP Menu)
- Configuring Multiservice TDC Mode Parameters for CTP Bundles (CTP Menu)
- Configuring Multiservice 4WTO Mode Port Parameters for CTP Bundles (CTP Menu)
- Configuring 4WTO Port Parameters for CTP Bundles (CTPView)
- Configuring 4WTO Port Parameters for CTP Bundles (CTP Menu)
- Configuring IRIG-B Port Parameters for CTP Bundles (CTPView)
- Configuring IRIG-B Port Parameters for CTP Bundles (CTP Menu)
- Configuring Advanced Port Options for CTP Bundles (CTPView)
- Configuring Advanced Port Options for CTP Bundles (CTP Menu)
- Configuring Port Mirroring for CTP Bundles (CTPView)
- Configuring Port Mirroring for CTP Bundles (CTP Menu)
- Configuring Cryptographic Resynchronization (Crypto Resync)
- Gathering Node Debugging Information (CTP Menu)
- Selecting the Type of Clocking on Serial Ports for CTP Bundles (CTPView)
- Selecting the Type of Clocking on Serial Ports for CTP Bundles (CTP Menu)
- Configuring Custom Clocking for CTP Bundles (CTPView)
- Configuring Custom Clocking for CTP Bundles (CTP Menu)
- Configuring Adaptive Clocking for CTP Bundles (CTPView)
- Configuring Adaptive Clocking for CTP Bundles (CTP Menu)
- play_arrow Network Node Reference Overview
- Configuring NetRef for Adaptive Bundle Operation
- Configuring NetRef for Primary or Backup Operation
- Support for Multiple Master Nodes to Associate With a Single Slave Node in NetRef
- Configuring NetRef Multiple Master Nodes (CTP Menu)
- Configuring NetRef Settings (CTPView)
- Guidelines for Configuring LOS Detection
- Configuring LOS Detection on CTP and SAToP Bundles (CTP Menu)
- play_arrow Administration
- play_arrow Querying CTP Bundles
- play_arrow Diagnostic Testing for CTP Bundles Overview
Configuring the Direction of the Circuit (CTP Menu)
This topic describes how to configure the direction of the circuit.
Before you begin:
Disable the bundle before you modify the bundle options.
To configure the direction of circuits created with the CTP bundle using the CTP Menu:
- From the CTP Main Menu, select 1) Bundle Operations.
- Select 1) CTP.
- Select a bundle from the list.
If you select an active bundle, you are prompted to disable the bundle before configuring it.
- Select 2) Config.
- Select 10) Advanced Options.
- Configure option 10 as described in Table 12.
Field | Function | Your Action |
---|---|---|
Unidirectional circuit | Specifies whether the circuit is unidirectional or bidirectional. If unidirectional, specify the direction of the circuit—source or destination. | Select one:
|