Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

close

keyboard_arrow_left

Table of Contents Expand all

play_arrow Overview
- play_arrow Using Bundles to Create Logical Configurations for Physical Interfaces Overview
  - Types of Bundles Overview
  - Interface Naming Conventions for the CTP Series
- play_arrow CTP Bundle Overview
- play_arrow Transparent Encoding Overview
- play_arrow TDM/TDC Encoding Overview
  - TDM/TDC Encoding Overview
- play_arrow Ethernet Media Configuration Overview
  - Ethernet Media Configuration Overview
play_arrow Configuration
- play_arrow Configuring CTP Bundles (CTP Menu)
- play_arrow Configuring CTP Bundles (CTPView)
play_arrow Administration
- play_arrow Activating, Disabling, Deleting, or Recentering CTP Bundles
  - Activating, Disabling, Deleting, or Recentering CTP Bundles (CTPView)
  - Activating, Disabling, Deleting, or Recentering for CTP Bundles (CTP Menu)
- play_arrow Querying CTP Bundles
- play_arrow Monitoring Packet Creation and Reception and Packet Delay
- play_arrow Diagnostic Testing for CTP Bundles Overview
- play_arrow Configuring and Displaying Diagnostic Testing for CTP Bundles
- play_arrow Reducing the Number of SNMP Traps Generated for Late and Missing Packets
  - Reducing the Number of SNMP Traps Generated for Late and Missing Packets (CTP Menu)
play_arrow Troubleshooting
- play_arrow Knowledge Base
  - https://kb.juniper.net/

list Table of Contents

English

keyboard_arrow_right

Displaying BERT Status and Counters for CTP Bundles (CTP Menu)

date_range 26-May-23

arrow_backward

arrow_forward

To display BERT status and counters with the CTP Menu:

From the CTP Main Menu, select 1) Bundle Operations.
Select the type of bundle.
Select a bundle from the list.
Select 8) Runtime Diags.
Select 6) BERT counts.
Table 1 describes the BERT status and counters.

Table 1: BERT Status and Counters in the CTP Menu
Field Name	Description
BERT Running time	Number of seconds the test has been running since BERT statistics were cleared.
Sync Seconds	Number of seconds that the local CTP device has been in sync with the remote CTP device.
Errored Seconds	Number of seconds during which there were errors.
Error Count	Number of errors found since BERT statistics were cleared.
Sync Loss Count	Number of times synchronization was lost.
Currently in SYNC	Shows whether the local CTP device is currently in sync with the remote device. YES—The local CTP device is in sync with the remote device. NO—The local CTP device is not in sync with the remote device.

arrow_backward PREVIOUS Configuring BERT Testing for CTP Bundles (CTPView)

NEXT arrow_forward Displaying BERT Status and Counters for CTP Bundles (CTPView)

footer-navigation