Allocating Channels for Analog Interfaces for VComp Bundles (CTP Menu)

date_range 26-May-23

arrow_backward

arrow_forward

This topic describes how to allocate channels for VComp bundles.

You can configure up to 30 voice channels on a VComp bundle. These channels can be one type only. For example, if the first channel of a VComp bundle is a 4WE&M type; any additional channels added to the bundle must be of the same type.

Before you begin:

Disable the bundle before you modify the bundle options.

To allocate channels using the CTP Menu:

From the Main Menu, select 1) Bundle Operations.
Select 4) VCOMP.
Select a bundle from the list.
If you select an active bundle, you are prompted to disable the bundle before configuring it.
Select 2) Config.
Select 3) Channel Allocation.
Follow the onscreen instructions, and configure the option as described in Table 1.

Table 1: VComp Bundle Channel Allocation Parameter Settings in the CTP Menu
Field	Function	Your Action
Channel Allocation (for analog interfaces)	Adds interfaces to or removes interfaces from the bundle. It is important to note that the order of the channels (indicated by the XX: prefix on the channel allocation display) corresponds to the relative channel positions of the channels in the bundle. They connect on a one-to-one basis with the channels in the VComp bundle on the remote end of the network. When channels are removed from a VComp bundle, remaining channels are shifted left.	Select one: 1) remove—Enter the port that you want to remove. 2) add—Enter the port that you want to add.

arrow_backward PREVIOUS Configuring 4WE&M Port Parameters for VComp Bundles (CTP Menu)

NEXT arrow_forward Allocating DS0 Time Slots for T1 and E1 Ports for VComp Bundles (CTP Menu)

Using VComp Bundles to Group Analog Circuits into One IP Circuit

Allocating Channels for Analog Interfaces for VComp Bundles (CTP Menu)

Stay in touch

Helped me install or use the product
Accelerated my deployment

Discuss the product with a co-worker
Make a purchase inquiry