Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Juniper Secure Edge Deployments

Configuration of Juniper Secure Edge Deployments

Note:

If you plan to use both Secure Edge and On-Premises deployment, kindly follow the on-premises deployment instructions first.

If you use Juniper Secure Edge services with JIMS, in the Secure Edge management interface you must generate the JIMS configuration file and download it to your local JIMS server. To do so, navigate to Secure Edge > Identity > JIMS > Onboard.

On the local JIMS server, import the JIMS configuration file into JIMS using the JIMS administrative UI. To do so, navigate to File > Juniper Secure Edge Connect. This will automatically import the settings for Secure Edge.

If you use the on-premises enforcement points, you can configure them as described in chapter Configuration of Customer Managed Devices (On-Premises) Deployment.

Add Directory Services

You must configure at least one directory server for JIMS Collector to collect users, devices, and group memberships. Currently, only Active Directory is supported.

If you plan to use multiple Directory Server with the same credentials, you could create a template to reduce the input for each directory server.

To add a new Directory Server:

  1. Click Add to add a new Directory Server.
  2. Optionally use an already created template to pre-configure the credentials.
  3. Enter the IP-address or FQDN of the server.
  4. Give a description.
  5. Enter the username (Login ID) and password for authentication purposes.
  6. Choose SSL Connection if the Directory Server is on a different host.
    Select and configure your active directory for LDAPS or TLS communication.