The following terms and conditions, together with the J-Net Community Usage Guidelines (the "Usage Guidelines"), apply to all visitors to or users ("users" or "you") of the J-Net Community websites and related forums (the "Community" or the "J-Net Community"). By accessing the Community, user acknowledges acceptance of, and agrees to abide by, these terms and conditions and the Usage Guidelines. These terms and conditions are not exhaustive. Juniper Networks, Inc. ("Juniper", "we" or "us") reserves the right to change these terms and conditions and/or the Usage Guidelines from time to time at its sole discretion by posting an update to the Community website where such content is regularly maintained.
In the case of any violation of these terms and conditions, Juniper reserves the right to suspend or terminate your right to access the J-Net Community. In addition, Juniper reserves the right to seek all remedies available by law and in equity for such violations. These terms and conditions apply to all visits to the J-Net Community, both now and in the future.
Certain of these blogs may contain forward-looking statements regarding future events or future expected results of Juniper Networks, Inc. (“Juniper”) that involve a number of uncertainties and risks because they are based on our current expectations, estimates, forecasts, and projections about our business, economic and market outlook, the industry in which we operate and the beliefs and assumptions of our management. Words such as “expects,” “anticipates,” “targets,” “goals,” “projects,” “would,” “could,” “intends,” “plans,” “believes,” “seeks,” “estimates,” variations of such words, and similar expressions are intended to identify such forward-looking statements. These statements may include information with respect to Juniper’s future strategies; technology; competitive landscape; partners, customers and suppliers; product portfolio and pipeline; performance; and overall prospects and are forward-looking statements within the meaning of the Private Securities Litigation Reform Act. Actual results or events could differ materially from those anticipated in these forward-looking statements as a result of several factors, including: general economic and political conditions globally or regionally; business and economic conditions in the networking industry; changes in overall technology spending and spending by communication service providers and major customers; the network capacity requirements of communication service providers; contractual terms that may result in the deferral of revenue; increases in and the effect of competition; the timing of orders and their fulfillment; issues resulting from the transition to our ERP system; manufacturing and supply chain constraints, changes or disruptions; availability of key product components; ability to establish and maintain relationships with distributors, resellers and other partners; variations in the expected mix of products sold; changes in customer mix; changes in geography mix; customer and industry analyst perceptions of us and our technology, products and future prospects; delays in scheduled product availability; market acceptance of our products and services; rapid technological and market change; adoption of regulations or standards affecting our products, services or the networking industry; the ability to successfully acquire, integrate and manage businesses and technologies; product defects, returns or vulnerabilities; the ability to recruit and retain key personnel; significant effects of tax legislation and judicial or administrative interpretation of tax regulations; currency fluctuations; litigation settlements and resolutions; the potential impact of activities related to the execution of capital return and product rationalization; and other factors listed in Juniper’s most recent report on Form 10-K and subsequent report on Form 10-Q filed with the Securities and Exchange Commission. All statements contained in these blogs are made only as of the date of such blog. Juniper undertakes no obligation to update the information provided in the event facts or circumstances subsequently change.
Statement of Product Direction
Certain of these blogs may disclose information related to Juniper’s development and plans for future products, features or enhancements (“SOPD”). SOPD information is subject to change at any time, without notice. Except as may be set forth in a definitive agreement for a potential transaction, Juniper provides no assurances, and assumes no responsibility, that future products, features or enhancements will be introduced. Except as may be set forth in a definitive agreement for a potential transaction, readers should not base purchasing decisions upon reliance of timeframes or specifics outlined in an SOPD, because Juniper may delay or never introduce the future products, features or enhancements.
Compliance With Applicable Laws; Export Control Laws
User access to the J-Net Community is governed by, and shall be subject to, all applicable national, federal, state and local laws and regulations. All information available within the J-Net Community is subject to U.S. export control laws and may also be subject to the laws of the country where you reside. User hereby agrees to comply with all applicable laws and regulations when accessing or otherwise using the Community.
The trademarks, logos and service marks ("Marks") displayed within J-Net Community are the property of Juniper or other third parties. Users are not permitted to use these Marks without the prior written consent of Juniper or such third party which may own the Mark. Juniper Networks, the Juniper Networks logo, NetScreen, and ScreenOS are registered trademarks of Juniper Networks, Inc. in the United States and other countries. JUNOS and JUNOSe are trademarks of Juniper Networks, Inc.
Juniper will provide J-Net Community forum moderators. These moderators are not necessarily authorized to present themselves as Juniper employees, and do not provide official Juniper content. Official Juniper content will be posted only by users identified as official Juniper site administrators. Juniper is not responsible for content posted by any user who is not designated as an official Juniper site administrator.
Although Juniper will attempt to ensure that accurate information is posted within the J-Net Community, Juniper assumes no responsibility for the accuracy of the information.
BY ACCESSING THE J-NET COMMUNITY, YOU EXPRESSLY AGREE THAT THE SERVICE AND CONTENT THEREIN ARE PROVIDED ON AN "AS IS" AND "AS AVAILABLE" BASIS AND THAT YOUR USE OF THE SERVICE IS AT YOUR SOLE RISK. JUNIPER EXPRESSLY DISCLAIMS ALL WARRANTIES OF ANY KIND RELATED TO THE COMMUNITY, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, NON-INFRINGEMENT OF INTELLECTUAL PROPERTY OR OTHER VIOLATIONS OF RIGHTS.
JUNIPER MAKES NO WARRANTY THAT THE COMMUNITY WILL MEET YOUR REQUIREMENTS OR THAT THE COMMUNITY WILL BE UNINTERRUPTED, TIMELY, SECURE OR ERROR-FREE. JUNIPER DOES NOT MAKE ANY REPRESENTATION OR WARRANTY AS TO THE RESULTS THAT MAY BE OBTAINED FROM THE USE OF THE COMMUNITY, THAT THE RESULTS THAT MAY BE OBTAINED FROM SUCH USE WILL BE RELIABLE OR ACCURATE OR THAT THE QUALITY OF ANY PRODUCTS, SERVICES, INFORMATION OR OTHER MATERIAL OBTAINED BY YOU THROUGH THE COMMUNITY WILL MEET YOUR EXPECTATIONS. JUNIPER MAKES NO WARRANTY THAT DEFECTS IN ITS OR ITS THIRD PARTY VENDORS'SOFTWARE WILL BE CORRECTED OR THAT THE WEBSITE OR SERVER THAT MAKES IT AVAILABLE WILL BE FREE OF VIRUSES OR OTHER HARMFUL COMPONENTS.
YOU UNDERSTAND AND AGREE THAT ANY OF THE MATERIAL AND/OR OTHER DATA DOWNLOADED OR OTHERWISE OBTAINED THROUGH THE USE OF COMMUNITY IS DONE AT YOUR OWN DISCRETION AND RISK AND THAT YOU WILL BE SOLELY RESPONSIBLE FOR ANY DAMAGE TO YOUR COMPUTER SYSTEM OR LOSS OF DATA THAT RESULTS FROM THE DOWNLOADING OF SUCH MATERIAL OR DATA.
NO ADVICE OR INFORMATION, WHETHER ORAL OR WRITTEN, OBTAINED BY YOU FROM JUNIPER OR THROUGH THE COMMUNITY SHALL CREATE ANY WARRANTY , CONTRACT OR LEGAL OBLIGATION NOT EXPRESSLY STATED IN A SEPARATE, BINDING AGREEMENT.
IF YOU ARE DISSATISFIED WITH THE COMMUNITY, THE MATERIALS AVAILABLE ON OR THROUGH THE COMMUNITY, OR WITH ANY OF THE USAGE GUIDELINES OR TERMS AND CONDITIONS APPLICABLE TO THE COMMUNITY, YOUR SOLE AND EXCLUSIVE REMEDY IS TO DISCONTINUE USE OF THE SERVICE.
Limitation of Liability
YOU EXPRESSLY UNDERSTAND AND AGREE THAT IN NO EVENT SHALL JUNIPER OR ANY OF ITS SUBSIDIARIES, AFFILIATES, EMPLOYEES, DIRECTORS, OFFICERS, AGENTS OR SUBCONTRACTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL, CONSEQUENTIAL OR EXEMPLARY DAMAGES, INCLUDING BUT NOT LIMITED TO DAMAGES FOR LOSS OF PROFITS, GOODWILL, USE, DATA, CONTENT OR OTHER INTANGIBLE LOSSES (EVEN IF JUNIPER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES), RESULTING FROM (I) THE USE OR INABILITY TO USE THE COMMUNITY (INCLUDING, BUT NOT LIMITED TO DELETION OR LOSS OF CONTENT, DEFECTS OR DELAYS IN TRANSMISSION, OR ANY FAILURE OF A SERVER, OR THE INTERNET), (II) THE COST OF PROCUREMENT OF SUBSTITUTE GOODS AND SERVICES RESULTING FROM THE COST OF ANY GOODS, DATA, INFORMATION OR SERVICES OBTAINED OR MESSAGES RECEIVED OR TRANSACTIONS ENTERED INTO THROUGH OR FROM THE COMMUNITY, (III) UNAUTHORIZED ACCESS TO OR ALTERATION OF YOUR TRANSMISSIONS OR DATA, (IV) STATEMENTS OR CONDUCT OF ANY THIRD PARTY ON THE COMMUNITY OR, (V) ANY OTHER MATTER RELATING TO THE COMMUNITY.
EXCLUSIONS AND LIMITATIONS:
SOME JURISDICTIONS DO NOT ALLOW THE EXCLUSION OF CERTAIN WARRANTIES OR THE LIMITATION OR EXCLUSION FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES AND THEREFORE SOME OF THE ABOVE LIMITATIONS IN THIS SECTION MAY NOT APPLY TO YOU.
Site Content Ownership
Content included at this site and provided by or on behalf of Juniper (including but not limited to text, graphics, logos, images and forum posts) is the exclusive property of Juniper. By submitting your content to the J-Net Community (including, but not limited to sending messages through this website or through other applicable websites or posting messages to discussion boards, and chat rooms), you hereby grant to Juniper and its subsidiaries a worldwide, perpetual, irrevocable, royalty-free and fully-paid, freely transferable, sub-licenseable (through multiple tiers) right to exercise all copyright, publicity, and moral rights, in any media now known or not currently known, with respect to any content you provide to us in any public space on this website or other J-Net Community web sites or in any e-mail that you provide to us through this web site or any other J-Net Community web sites. By submitting content to the J-Net Community, you further represent and warrant to Juniper and other members of the J-Net Community that the content and act of such submission, and any subsequent access and/or use of such content by Juniper or members of the J-Net Community in accordance with these terms and conditions, does not and will not violate the terms of any agreements with or obligations to any other parties, including, without limitation, any agreements regarding confidentiality, intellectual property rights. Juniper reserves the right to add, delete, edit, modify, and take any other action Juniper deems necessary to preserve the integrity of all Community forum posts.
Juniper reserves the right to investigate any violation of these terms and conditions and the Usage Guidelines and to take appropriate action. Juniper has absolute discretion to enforce the terms of these documents. Remedial action may include, but is not limited to warning users, suspending access to J-Net Community, deleting or editing any content. Juniper may request that a user delete, edit, or re-submit any inappropriate content.
To report violations, please contact the J-Net Community moderators at: email@example.com. Please include the message board name and the link of the post in question.
International Site Use
J-Net Community are designed for US based customers and products purchased in the US for use in the US. All Community Forum content is in English. English language customers are welcome to use the J-Net Community. The Community Forum may not be helpful or relevant to international customers. Not all products or programs mentioned will be available internationally. Please contact your local sales representative for information as to products and services available in your country.
Links to Third Party Sites
J-Net Community may contain links to third party sites. Access to any other Internet site linked to the Community is at the user's own risk and Juniper is not responsible for the accuracy or reliability of any information, data, opinions, advice or statements made on these sites. Juniper provides these links merely as a convenience and the inclusion of such links does not imply an endorsement. Any links posted by users are subject to all terms and conditions like any other type of content posted to the J-Net Community. You may not post a link in the Community that directs users to any content or information that would constitute a violation of the terms and conditions.
Use of the J-Net Community is at your own risk. Do not post any information that you do not wish to make public. Any information that you post can be obtained and used by others. You post at your own risk. It is not possible to be certain that fellow Community users are who they say they are.
Access to Password Protected/Secure Areas
Access to and use of password protected and/or secure areas of the Community is restricted to authorized users only. Unauthorized individuals attempting to access these areas of the Community may be subject to prosecution.
No license to any Juniper product, service or proprietary rights (including, but not limited to, Juniper's confidential information, copyrights, patents, trademarks or trade secrets) is granted to users by accessing or using the Community. Users are required to abide by the terms of all applicable license agreements with respect to any content, software or other materials provided to, or accessed or obtained in connection with, the Community.
Digital Millennium Copyright Act Juniper respects the intellectual property of others. Juniper will respond promptly to claims of intellectual property misuse and, where applicable, remove the potentially infringing material.
Pursuant to 17 U.S.C. § 512 as amended by Title II of the Digital Millennium Copyright Act ("Act"), Juniper has implemented procedures for receiving written notification of claimed infringements and for processing such claims in accordance with the Act. If you believe your copyrights are being infringed by a Juniper customer or other third party on the community or through the Service, please fax a Notice of Infringement to Juniper addressed to the following person at the following fax number: Vice President, Intellectual Property at 408.745.2100. The Notice of Infringement must substantively comply with the safe harbor provisions of the Digital Millennium Copyright Act and must contain the following information as set forth in 17 U.S.C. § 512(c)(3)(A), which provides:
To be effective under this subsection, a notification of claimed infringement must be a written communication provided to the designated agent of a service provider that includes substantially the following:
(i) A physical or electronic signature of a person authorized to act on behalf of the owner of an exclusive right that is allegedly infringed.
(ii) Identification of the copyrighted work claimed to have been infringed, or, if multiple copyrighted works at a single online site are covered by a single notification, a representative list of such works at that site.
(iii) Identification of the material that is claimed to be infringing or to be the subject of infringing activity and that is to be removed or access to which is to be disabled, and information reasonably sufficient to permit the service provider to locate the material.
(iv) Information reasonably sufficient to permit the service provider to contact the complaining party such as an address, telephone number, and if available, an electronic mail address at which the complaining party may be contacted.
(v) A statement that the complaining party has a good faith belief that use of the material in the manner complained of is not authorized by the copyright owner, its agent, or the law.
(vi) A statement that the information in the notification is accurate, and under penalty of perjury, that the complaining party is authorized to act on behalf of the owner of an exclusive right that is allegedly infringed.
Notification from a copyright owner or from a person authorized to act on behalf of the copyright owner that fails to comply substantially with the provisions above shall not be considered as providing actual knowledge or an awareness of facts or circumstances from which infringing activity is apparent.
Please provide a separate notification of infringement each time you wish to report alleged acts of infringement and fax it to the number provided.