JNCIS-FWV Exam Objectives (Exam: JN0-532)

This list is intended to provide a general view of the skill set required to successfully complete the specified certification exam. Topics listed are subject to change.

• VPNs
• Network Management
• Troubleshooting with Debug & Snoop
• Traffic Management
• Virtual Systems
• NSRP
• Dynamic Routing/Routing over VPNs
• Attack Prevention
• Multicast

VPNs

• Identify IKE Phase 1/Phase2 negotiation sequence and proposals
• Identify/differentiate IPSec standard elements (encapsulations, SA, SPI, etc.)
• List steps for policy-based/route-based VPN configuration
• Relate proxy-ID to VPN setup
• Identify proper configuration for various hub/spoke configurations (policy, int. placement, etc.)
• Identify NHTB requirements/configurations
• Configure/verify AC-VPNs
• Identify PKI components (certificates, CDL, etc.)
• List steps for PKI implementation w/ VPNs
• VPN Variations
• Configure Dynamic Peer VPNs
• Configure Transparent mode VPNs
• Configure Overlapping Networks
• Describe GRE applications/Configure GRE

Network Management

• Configure local management (SSL, SSH, management restrictions).
• Interpret internal counters and logs.
• Configure SYSLOG.
• Discuss logging levels.
• Configure SNMP.

Troubleshooting with Debug/Snoop

• Enable debug/snoop.
• Set debug filters.
• Set snoop filters.
• Use get commands to validates/troubleshoot routing and policies.
• Use debug output to identify routing and policy problems.
• Use get commands to validate/troubleshoot address translation.
• Use debug output to identify problems
• Use get commands to validate/troubleshoot VPN setup.

Traffic Management

• Describe the bandwidth allocation process.
• Describe queuing functionality.
• List requirements/steps for configuring traffic management.

Virtual Systems

• Define VSYS applications
• Describe root vs. VSYS administration
• Explain VSYS vs. root assignment of routes/NAT pools/etc.
• Configure interface-based VSYS
• Configure inter-VSYS communications, including NAT.
• Use show/debug output to identify VSYS usage.
• Configure VSYS resource allocation

NSRP

• Distinguish active/passive and active/active.
• Describe NSRP operations (HA link, session sync, master election, etc.)
• Configure active/passive and active/active NSRP.
• Validate NSRP operations.
• Adjust operations (secondary link, failover settings).
• Configure redundant interface.

Dynamic Routing/Routing over VPNs

• Configure RIP over VPNs
• Configure OSPF over VPNs
• Configure/verify OSPF routing
• Configure OSPF options
• Configure/verify BGP
• Configure redistribution/filters/route maps
• Configure static routes incl. floating static routes
• Configure/verify source routing
• Configure/verify policy routing

Attack Prevention

• Describe SCREEN functions
• Describe/configure Deep Inspection
• Describe/configure anti-virus functionality
• Configure web filtering

Multicast

• Configure/verify IGMP
• Configure/verify PIM-SM