pim
Syntax
pim {
disable;
assert-timeout seconds;
dense-groups {
addresses;
}
dr-election-on-p2p;
export;
family (inet | inet6) {
disable;
}
graceful-restart {
disable;
no-bidirectional-mode;
restart-duration seconds;
}
import [ policy-names ];
interface (Protocols PIM) interface-name {
family (inet | inet6) {
disable;
}
bfd-liveness-detection {
authentication {
algorithm algorithm-name;
key-chain key-chain-name;
loose-check;
detection-time {
threshold milliseconds;
}
minimum-interval milliseconds;
minimum-receive-interval milliseconds;
multiplier number;
no-adaptation;
transmit-interval {
minimum-interval milliseconds;
threshold milliseconds;
}
version (0 | 1 | automatic);
}
accept-join-always-from [ policy-name ... ];
accept-remote-source;
disable;
bidirectional {
df-election {
backoff-period milliseconds;
offer-period milliseconds;
robustness-count number;
}
}
family (inet | inet6) {
disable;
}
hello-interval seconds;
mode (bidirectional-sparse | bidirectional-sparse-dense | dense | sparse | sparse-dense);
neighbor-policy [ policy-names ];
override-interval milliseconds;
priority number;
propagation-delay milliseconds;
reset-tracking-bit;
version version;
}
join-load-balance;
join-prune-timeout;
mdt {
data-mdt-reuse;
group-range multicast-prefix;
threshold {
group group-address {
source source-address {
rate threshold-rate;
}
}
tunnel-limit limit;
}
}
mvpn {
autodiscovery {
inet-mdt;
}
}
nonstop-routing;
override-interval milliseconds;
propagation-delay milliseconds;
reset-tracking-bit;
rib-group group-name;
rp {
auto-rp {
(announce | discovery | mapping);
(mapping-agent-election | no-mapping-agent-election);
}
bidirectional {
address address {
group-ranges {
destination-ip-prefix</prefix-length>;
}
hold-time seconds;
priority number;
}
}
bootstrap {
family (inet | inet6) {
export [ policy-names ];
import [ policy-names ];
priority number;
}
}
bootstrap-import [ policy-names ];
bootstrap-export [ policy-names ];
bootstrap-priority number;
dr-register-policy [ policy-names ];
embedded-rp {
group-ranges {
destination-ip-prefix</prefix-length>;
}
maximum-rps limit;
}
group-rp-mapping {
family (inet | inet6) {
log-interval seconds;
maximum limit;
threshold value;
}
}
log-interval seconds;
maximum limit;
threshold value;
}
}
local {
family (inet | inet6) {
address address;
anycast-pim {
rp-set {
address address <forward-msdp-sa>;
}
disable;
local-address address;
}
group-ranges {
destination-ip-prefix</prefix-length>;
}
hold-time seconds;
override;
priority number;
}
}
register-limit {
family (inet | inet6) {
log-interval seconds;
maximum limit;
threshold value;
}
}
log-interval seconds;
maximum limit;
threshold value;
}
}
rp-register-policy [ policy-names ];
spt-threshold {
infinity [ policy-names ];
}
static {
address address {
override;
version version;
group-ranges {
destination-ip-prefix</prefix-length>;
}
}
}
}
rpf-selection {
group group-address{
sourcesource-address{
next-hop next-hop-address;
}
wildcard-source {
next-hop next-hop-address;
}
}
prefix-list prefix-list-addresses {
source source-address {
next-hop next-hop-address;
}
wildcard-source {
next-hop next-hop-address;
}
}
sglimit {
family (inet | inet6) {
log-interval seconds;
maximum limit;
threshold value;
}
}
log-interval seconds;
maximum limit;
threshold value;
}
}
traceoptions {
file filename <files number> <size size> <world-readable | no-world-readable>;
flag flag <flag-modifier> <disable>;
}
tunnel-devices [ mt-fpc/pic/port ];
}
Hierarchy Level
[edit logical-systems logical-system-name protocols], [edit logical-systems logical-system-name routing-instances routing-instance-name protocols], [edit protocols], [edit routing-instances routing-instance-name protocols]
Description
CAUTION:
Enabling tracing can adversely impact scale and performance and may increase security risk. We strongly recommend using the trace, tracing, or traceoptions commands only under the guidance of a JTAC support engineer. After collecting the debug information, immediately disable tracing to minimize risk and restore normal system performance.
Enable PIM on the routing device.
The remaining statements are explained separately. See CLI Explorer.
Default
PIM is disabled on the routing device.
Required Privilege Level
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Release Information
Statement introduced before Junos OS Release 7.4.
family statement introduced in Junos OS Release 9.6.