Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 
 

Protocols and Applications Supported by MX10K-LC9600 for MX10004 and MX10008 Series Routers

Table 1 contains the first Junos OS Release support for protocols and applications on the MX10K-LC9600. The protocols and applications support feature parity with Junos OS Release 21.4R1.

A dash indicates that the protocol or application is not supported.

Table 1: Protocols and Applications Supported by MX10K-LC9600 for MX10004 and MX10008 Routers

Protocol or Application

First Supported Junos OS Release for MX10K-LC9600
Access Node Control Protocol (ANCP)

21.4R1

Accepts traffic destined for generic routing encapsulation (GRE) tunnels or Distance Vector Multicast Routing Protocol (DVMRP) (IP-in-IP) tunnels

21.4R1

Bidirectional Forwarding Detection protocol (BFD)

21.4R1

Border Gateway Protocol (BGP)

21.4R1

Bridge protocol data units (BPDUs)

21.4R1

BGP/MPLS virtual private networks (VPNs)

21.4R1

IEEE 802.1ag Ethernet OAM Continuity Check protocol

21.4R1

IEEE 802.1ag Ethernet OAM Linktrace protocol

21.4R1

IEEE 802.1ag Ethernet OAM Loopback protocol

21.4R1

IEEE 802.1ag maintenance association intermediate point (MIP) support, continuity check message (CCM), stacked VLAN tagging, trunk ports, support for VPLS/VPWS, VLAN circuit cross-connect (CCC) encapsulation and translational cross-connect (TCC) encapsulation

21.4R1

IEEE 802.1ag optional type, length, and value (TLVs) support Port Status TLV and Interface Status TLV

21.4R1

IEEE 802.3ah distributed periodic packet management (PPM) process , alarm indication signal (AIS), and remote defect indication (RDI)

21.4R1

IGMPv3 support with snooping disabled

21.4R1

Integrated routing and bridging (IRB)

21.4R1

IPv4

21.4R1

IPv4 multicast

21.4R1

IPv6

21.4R1

IPv6 MLD

21.4R1

IPv6 multicast

21.4R1

IPv6 Neighbor Discovery

21.4R1

Two-Way Active Measurement Protocol (TWAMP)

21.4R1

RSVP Overview

21.4R1

RIP

21.4R1
Protocol Independent Multicast

21.4R1
Class of Service

Class of service (CoS):

  • Maintain CoS across internal tunnel interfaces

  • Packet rewrites

  • Behavior aggregate (BA) classification

  • BA classification based on 802.1p of payload for core-facing VPLS interfaces

  • BA DSCP classification of MPLS packets for L3VPN/VPLS LSI and MPLS interfaces

  • Rate limit option for per-port queues

  • BA DSCP classification for VPLS/CCC family

  • Configurable .1p inheritance: push and swap from the hidden tag

  • Configurable shaping overhead for scheduling

21.4R1

Class of service (CoS) per port:

  • Eight queues per port

  • Excess-rate and excess-priority configurations at the queue level

  • Shaping at the port level

  • Shaping at the queue level

  • Scheduling of queues based on the weighted round-robin (WRR) per excess-priority class

  • Round-robin scheduling of the queues per priority class

  • Weighted random early detection (WRED)

21.4R1

Class of service (CoS) per virtual LAN (VLAN):

  • Accounting, filtering, and policing

  • IEEE 802.1p rewrite

  • Classification

  • Tricolor marking

21.4R1

Class of service (CoS) per Point-to-Point Protocol over Ethernet (PPPoE) or Dynamic Host Configuration Protocol (DHCP) subscriber interfaces:

  • Accounting, filtering, and policing

  • IEEE 802.1p rewrite

  • Classification

  • Excess-rate and excess-priority configuration at the queue level

  • Tricolor marking

  • Shaping at the queue level

  • Scheduling of queues based on weighted round-robin (WRR) per priority class

  • Weighted random early detection (WRED)

21.4R1

Forwarding Class of Service (CoS) and Hierarchical Class of Service (CoS):

  • Classifiers

  • Rewrites

  • Port queuing

  • L3 only

  • Q-depth monitoring

  • Hierarchical Class of Service (CoS)

21.4R1

Ingress and egress hierarchical class-of-service (CoS) shaping and hierarchical-scheduler:

  • Group of virtual LANs (VLANs) level

  • VLAN level

  • Port level

21.4R1

Flexible Queuing Mode

21.4R1

Intelligent Oversubscription on MIC and MPC Interfaces Overview

21.4R1
Firewall Filters, Policers, and Other Security Services

Policer support for aggregated Ethernet

21.4R1

Aggregate firewall-based policer for all families of a logical interface

21.4R1

Intelligent hierarchical policers

21.4R1

Set forwarding class and loss priority for Routing Engine-generated packets by using a firewall

21.4R1

Physical interface policers, applying policers to the entire port

21.4R1

Lower policer limit from 32K to 8K

21.4R1

Egress .1p MF and BA classification for VPLS

21.4R1
Differentiated Services Code Point (DSCP) rewrite for IPv4 and IPv6

21.4R1
Filter-Based Tunneling Across IPv4 and IPv4 Networks,Three-Color Policer

21.4R1

Distributed Denial-of-Service (DDoS) Protection

21.4R1

GCM-AES-128 MACSec Encryption, 802.1AE-2006

21.4R1

GCM-AES-256 MACSec Encryption, 802.1AEbn-2011

21.4R1
Network Management, Monitoring, Sampling, and Collection Services

Active monitoring

21.4R1

Port mirroring family VPLS, bridge CCC encapsulation (VPWS)

21.4R1

Packet slice for port mirroring

21.4R1

Inline flow monitoring

21.4R1
Inline Video Monitoring

21.4R1
FlowTapLite

21.4R1
Inline Monitoring Services Configuration

21.4R1
Real-Time Performance Monitoring

21.4R1
sFlow Technology

21.4R1
Port Mirroring

21.4R1

ITU-T Y.1731 timestamping support on MX Series routers

21.4R1
Link Fault Management (LFM) and Connectivity Fault Management (CFM)

21.4R1

SNMP

21.4R1
Layer 2 Protocols

21.4R1

VPLS

21.4R1

VPWS

21.4R1

Mesh Group

21.4R1

Multicast Snooping with PIM, IGMP, and MLD

21.4R1
Layer 2 Features

Layer 2 bridging with trunk and access modes

21.4R1

MAC learning and aging

21.4R1

Handling BUM (broadcast, unknown unicast and multicast) traffic, including split horizon

21.4R1

MAC move

21.4R1

Layer 2 forwarding and flooding statics

21.4R1

Static MAC addresses

21.4R1

Bridging on untagged interfaces

21.4R1

Q-in-Q Tunneling and VLAN Translation

21.4R1

MAC learning and forwarding on AE interfaces

21.4R1

Forwarding CoS (Q-depth monitoring)

21.4R1

Layer 2 firewall forwarding support

21.4R1

Layer 2 forwarding (IRB, VLAN handling, and Q-in-Q tunneling)

21.4R1

Load balancing

21.4R1

Multicast features

21.4R1

Dynamic learning of source and destination MAC addresses on aggregated Ethernet interfaces

21.4R1

MAC statistics

21.4R1

VRRP

21.4R1

Link aggregation (IEEE 802.3ad)

21.4R1

Link Aggregation Control Protocol (LACP)

21.4R1

Link Layer Discovery Protocol (LLDP)

21.4R1

Local loopback

21.4R1

MAC learning, policing, accounting, and filtering

21.4R1

Mobile IP

-

Multiple Tag Protocol Identifiers (TPIDs)

21.4R1

Packet mirroring

21.4R1

IEEE 802.1ah provider backbone bridging (PBB)

-

Push a tag on Ethernet VPLS and Ethernet CCC tag encapsulations

21.4R1

Spanning Tree Protocols:

21.4R1

OSPF

21.4R1

mvrp

21.4R1

IS-IS

21.4R1

Unnumbered Ethernet Interface

21.4R1

Tunnel services

21.4R1

VLANs IEEE 802.1Q:

  • VLAN stacking and rewriting

  • Flexible VLAN tagging

  • IP service for nonstandard TPID and stacked VLAN tags

21.4R1

Virtual private LAN service (VPLS):

  • BGP multihoming for inter-AS VPLS

  • Gigabit Ethernet as core-facing interface

  • Configurable label block sizes

  • Hashing L3/L4 fields under Ethernet pseudowire for VPLS encapsulation, CCC encapsulation, and MPLS encapsulation

  • VPLS flood forwarding table filter (FTF), input FTF

  • Broadcast, unicast unknown, and multicast (BUM) traffic hashing over LAG

21.4R1

Multihoming in an EVPN-MPLS environment, IRB interface on Ethernet VPN (EVPN)

21.4R1

EVPN-VXLAN (Multicast and Unicast), EVPN-VXLAN support for VXLAN Gateways using an IPv6 underlay

21.4R1
Inter-VLAN and Intra-VLAN multicast forwarding modes for EVPN, Inclusive Multicast Ethernet Tag (IMET), Selective Multicast Ethernet Tag (SMET)

21.4R1

Virtual private network (VPN)

21.4R1

Virtual Router Redundancy Protocol (VRRP) for IPv4

21.4R1

VPLS packet flooding to the right set of interfaces across mesh groups

21.4R1

WAN-PHY mode

-

Forwarding Layer 3 Features

  • Layer 3 VPN

  • RIP

  • Targeted broadcast

  • TCP maximum segment size (MSS)

  • BGP (multipath/v4-v6 labelled unicast)

  • IPv4 (forwarding and options)

  • IPv6 (forwarding and route accounting)

  • Load balancing (ECMP and FRR). Options supported: enhanced-hash-key family inet/inet6/mpls

  • Layer 2 VPN, CCC, and L2 Circuit

  • MPLS (Push/Pop/Swap, LDP, RSVP Aggregate, RSVP TE Admin Groups, RSVP-TE, OAM - LSP/VPN ping, Trace Route, Auto Bandwidth, and MPLS-FRR Link node protection. Options supported: No Decrement Ttl, No Propagate Ttl, MTU-signaling Splitting-merging, Primary/Secondary, ICMP Tunneling, IPv6 Tunneling, LDP Tunneling, Optimize Timer, Explicit-Null, UHP and PHP support.

  • OSPF (node-link-protection and node-link-degradation)

  • Protocols (ISIS, OSPF, OSPF V3 for V6, BGP + BGP-v6, BGP LU, BGP-LS, BGP optimal-route-reflection (ORR), BFD (Centralized), Micro BFD (Centralized), ICMP and ICMPv6 error handling, and LLDP).

  • Routing Instance Logical System VRF

  • Tunnel (Generic Routing Encapsulation (GRE), Logical Tunnel (LT), and Virtual Tunnel (VT))

21.4R1

Layer 3 features

  • MPLS- Static, RSVP and LDP LSPs

  • Multicast- P2MP (RSVP-TE P2MP and multipoint LDP inband) and P2MP interface support for PIM, Rosen multicast VPNs, and multicast-only fast reroute (MoFRR)

  • Static Tunnel

21.4R1

Forwarding Firewall

  • Filter Matches

  • Filter Actions (Basic, Advanced)

  • Dependent Firewall Actions

  • Filter attachment (Basic, Advanced)

  • Interface Types (Basic)

  • Pseudo interface Types (PsoLT, FTI)

  • Filter Based Tunneling

  • Policers (Basic, Advanced)

  • Interface-Group

  • Policer Overhead

  • Interface-Specific

  • Instance-shared

  • ARP Policer

  • Fast Update Filter (FUF)

  • Service Filter (SF)

  • Fast Lookup Filter (FLT)

  • Implicit Filter (Basic, Advanced)

  • JVISION

  • SNMP

21.4R1
MPLS
Switching of pseudowire segments (multisegment pseudowires with BGP-L2VPN)

21.4R1
LDP signaling for VPLS (LDP-VPLS) and MAC flush message processing (MAC-FLUSH-TLV)

21.4R1
RSVP graceful restart interoperability with Cisco using Nodal Hello

21.4R1
Failure action on BFD session down of RSVP LSPs

21.4R1
OSPF and IS-IS loop-free alternates (LFA)

21.4R1
Label Depth – 16

21.4R1
Virtual circuit connectivity verification (VCCV) BFD

21.4R1
Point to multipoint using the enhanced-ip command (support for NG-MVPN and P2MP load balancing over aggregated Ethernet)

21.4R1
MPLS-FRR bypass link protection

21.4R1
Load sharing across 64 ECMP next hops

21.4R1
MPLS-FRR VPLS instance prioritization

21.4R1
Five label stack on ingress

21.4R1
MPLS node protection, link protection, and statistics for static LSPs

21.4R1

Labeled-switched-paths (LSPs) including accounting, policers, and filtering

21.4R1

Minimum LDP Configuration

21.4R1

Flexible Ethernet encapsulation

21.4R1
Interfaces and Chassis
Port speed support (10GbE to 400GbE) 21.4R1

Dynamic Power Management

21.4R1

Interoperability with LC2101 and LC480

21.4R1
Resiliency and High Availability

Platform software resiliency support

21.4R1

5+1 active fabric redundancy

21.4R1
Load Balancing on Aggregated Ethernet Interfaces

21.4R1

Unified In-service software upgrade (Unified ISSU)

-

Graceful Routing Engine Switchover (GRES)

21.4R1

Ethernet Ring Protection Switching with multiple G.8032 instances

21.4R1
Timing and Synchronization

Synchronous Ethernet

21.4R1

Precision Time Protocol (PTP) (IEEE 1588)

21.4R1
Subscriber management and services

Enhanced subscriber management

21.4R1
Aggregated Ethernet over static VLANs

21.4R1
Aggregated Ethernet over dynamic VLANs

21.4R1
DHCP access model

21.4R1
Dynamic adjustment of shapers

21.4R1
Dynamic PPPoE subscriber interface creation based on PPPoE service name table configuration

21.4R1
Dynamic profiles

21.4R1
Dynamic shaping, scheduling, and queuing

21.4R1
Dynamic VLANs

21.4R1
Static and dynamic PPPoE subscriber interfaces

21.4R1
Other Features

Nonstop active routing (NSR)

21.4R1

Secure Boot

21.4R1

Junos telemetry interface (JTI) CPU and network processing unit (NPU) sensors

21.4R1

Seamless MPLS Layer 2 and Layer 3 features

  • Layer 2 feature: Pseudowire Headend Termination (PWHT)

  • Layer 3 features: Redundant logical tunnel interfaces and Pseudowire subscriber interfaces using either logical tunnel or redundant logical tunnel interfaces as anchor point.

21.4R1

Multitopology routing

21.4R1
Segment Routing

21.4R1
Inline NAT, Inline MAP-E, Inline 6rd

21.4R1

RFC 2544-based benchmarking tests (reflector function)

21.4R1

SR-TE statistics for uncolored SR-TE policies streaming on JTI

21.4R1