Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

mvrp

 

List of Syntax

Syntax (EX Series with ELS Support)

Syntax (EX Series)

Syntax (MX Series, EX Series, SRX 1500, SRX 300, SRX 550M, SRX 345, SRX 340, SRX 320)

Syntax (EX Series with ELS Support)

Syntax (EX Series)

Syntax (MX Series, EX Series, SRX 1500, SRX 300, SRX 550M, SRX 345, SRX 340, SRX 320)

EX Series with ELS Support

EX Series and MX Series

SRX 1500, SRX 300, SRX 550M, SRX 345, SRX 340, SRX 320

Release Information

Statement introduced in Junos OS Release 10.0 for EX Series switches.

Statement introduced in Junos OS Release 10.1 for MX Series routers.

Statement introduced in Junos OS Release 13.2X50-D10 for EX Series switches with ELS support.

Statement introduced in Junos OS Release 15.1X49-D70 for SRX Series devices.

Description

For Layer 2 networks, configure Multiple VLAN Registration Protocol (MVRP) to dynamically share VLAN information and dynamically configure needed VLANs. Maintaining VLAN configurations based on active VLANs reduces the amount of traffic traveling in the network, saving network resources. MVRP is configured on trunk interfaces.

Configure Multiple VLAN Registration Protocol (MVRP) on a trunk interface to ensure that the VLAN membership information on the trunk interface is updated as the switch’s access interfaces become active or inactive in the configured VLANs.

Note

At Junos OS Release 11.3, MVRP was updated to conform to the IEEE standard 802.1ak. This update might result in compatibility issues in mixed release networks. For details, see Configuring Multiple VLAN Registration Protocol (MVRP) on Switches .

The remaining statements are explained separately. See CLI Explorer.

Default

MVRP is disabled by default.

Required Privilege Level

routing—To view this statement in the configuration.

routing-control—To add this statement to the configuration.