Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Configuring SNMP Chassis Alarms (SRC CLI)
To configure SNMP chassis alarms:
 | Note: The chassis alarm is not supported in the virtualized SRC software. Hence, you cannot commit the SRC configurations in the virtualized SRC software if the chassis alarm is enabled. |
- Set the editing level for the CLI to expert.user@host> set cli level expert
- From configuration mode, access the configuration statement
that configures the chassis alarms. [edit]user@host# edit snmp monitor chassis-alarm
- (Optional) Disable all chassis alarms. You cannot delete
the chassis alarms. [edit snmp monitor chassis-alarm]user@host# set disable
- (Optional) Specify the number of seconds between which
SNMP samples the value of an object. For example:[edit snmp monitor chassis-alarm]user@host# set interval 60
