Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Retry Options for the Failover Policy

    You must configure retry options for the failover policy for both accounting and authentication messages. Use the following statement to configure retry options:

    shared sic group identifier radius network-element id downstream (authentication | accounting) failover-policy retry { number number; timeout timeout; }

    To configure retry options for the failover policy:

    1. From configuration mode, access the statement that configures retry options for the failover policy. For example, this sample procedure uses group1 for the group identifier, ne1 for the network element identifier, and accounting as the connection type.
      edit shared sic group group1 radius network-element ne1 downstream accounting failover-policy retry
    2. Specify the maximum number of times a message is retransmitted if an acknowledgment from the target is not received.
      [edit shared sic group group1 radius network-element ne1 downstream accounting failover-policy retry]user@host# set number number
    3. Specify the number of seconds between retry attempts.
      [edit shared sic group group1 radius network-element ne1 downstream accounting failover-policy retry]user@host# set timeout timeout

    Modified: 2014-06-11