Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring the Local Diameter Peer (SRC CLI)

    Use the following configuration statements to configure the local Diameter peer:

    slot number ims aracf-rq { protocol protocol; port port; address address; origin-host origin-host; origin-realm origin-realm; }

    To configure the local Diameter peer:

    1. From configuration mode, access the statement that configures the Diameter peer.
      user@host# edit slot 0 ims aracf-rq
    2. (Optional) Specify the protocol used for the transport layer.
      [edit slot 0 ims aracf-rq] user@host# set protocol protocol
    3. (Optional) Specify the port used for incoming connections.
      [edit slot 0 ims aracf-rq] user@host# set port port
    4. (Optional) Specify the IP address of the local peer.
      [edit slot 0 ims aracf-rq] user@host# set address address
    5. (Optional) Specify the Diameter identifier for the local endpoint that is the originator of the Diameter message.
      [edit slot 0 ims aracf-rq] user@host# set origin-host origin-host
    6. (Optional) Specify the Diameter identifier for the realm of the local endpoint that is the originator of the Diameter message.
      [edit slot 0 ims aracf-rq] user@host# set origin-realm origin-realm
    7. (Optional) Verify your configuration.
      [edit slot 0 ims aracf-rq] 
      user@host# show 
      protocol tcp;
      port 3868;
      address 127.0.0.1;
      origin-host testserver;
      origin-realm testrealm;
      peer 1 {
        address 127.0.0.1;
        origin-host testclient;
      }

    Modified: 2012-11-22