Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Configuring JunosE Secondary Input Policy Conditions (SRC CLI)
For JunosE policies, you can apply secondary input policies to the input (ingress) side of the router interface. Secondary input policies evaluate conditions after a route lookup.
Use the following configuration statements to configure match conditions for JunosE secondary input policies:
policies group name list name rule name traffic-condition name traffic-match-condition
{ source-class source-class ; destination-class destination-class ; traffic-class traffic-class; color color; user-packet-class user-packet-class; destination-local-interface destination-local-interface ; }
To add conditions for JunosE secondary input policies to a classify-traffic condition:
- From configuration mode, create a classify-traffic condition
inside a policy rule that has already been created and configured
for a policy list whose type is junose-ipv4 or junose-ipv6 and applicability
is secondary-input. For example, to create a traffic-condition called
rtcl within policy rule clacl: user@host# edit policies group junose list ipv4 rule clacl traffic-condition rtcl traffic-match-condition
- (Optional) Configure the condition to match packets based
on the source route class. [edit policies group junose list ipv4 rule clacl traffic-condition rtcl traffic-match-condition]user@host# set source-class source-class
- (Optional) Configure the condition to match packets based
on the destination route class. [edit policies group junose list ipv4 rule clacl traffic-condition rtcl traffic-match-condition]user@host# set destination-class destination-class
- (Optional) Configure the condition to match packets based
on the traffic class. [edit policies group junose list ipv4 rule clacl traffic-condition rtcl traffic-match-condition]user@host# set traffic-class traffic-class
- (Optional) Configure the condition to match packets based
on the packet color. [edit policies group junose list ipv4 rule clacl traffic-condition rtcl traffic-match-condition]user@host# set color color
- (Optional) Configure the condition to match packets based
on the user packet class action number. [edit policies group junose list ipv4 rule clacl traffic-condition rtcl traffic-match-condition]user@host# set user-packet-class user-packet-class
- (Optional) Configure the condition to match packets based
on packets destined for a local interface. [edit policies group junose list ipv4 rule clacl traffic-condition rtcl traffic-match-condition]user@host# set destination-local-interface destination-local-interface
- (Optional) Verify the secondary input policy configuration.
[edit policies group junose list ipv4 rule clacl traffic-condition rtcl traffic-match-condition] user@host# show
