Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Verifying System Status

    You can use show commands to check system status and monitor system activity.

    To help you become familiar with show commands:

    1. Type show ? to display the list of show commands that you can use to monitor the SRC software and C Series Controller.
      user@host> show ?
      Possible completions:
        acp                  Display information about ACP
        cli                  Configure properties for the CLI environment
        component            Display information about SRC components
        configuration        Information about the SRC configuration
        date                 System time and date
        disk                 Configuration for RAID disks
        interfaces           Show interface information
        iptables             Display information about the iptables LINUX tool
        jps                  Display information about the JPS
        nic                  Display information about the NIC
        ntp                  NTP configuration information
        redirect-server      Statistics for redirect server
        route                Show routing table information
        sae                  Display SAE information
        security             Display security information
        system               Display system information
    2. Use the show component command to view the status of installed components.
      user@host> show component 
      Installed Components
      Name      Version                                            Status
      cli       Release: 7.0 Build: CLI.A.7.0.0.0171               running 
      acp       Release: 7.0 Build: ACP.A.7.0.0.0174               disabled
      jdb       Release: 7.0 Build: DIRXA.A.7.0.0.0176             running 
      editor    Release: 7.0 Build: EDITOR.A.7.0.0.0176            disabled
      redir     Release: 7.0 Build: REDIR.A.7.0.0.0176             disabled
      licSvr    Release: 7.0 Build: LICSVR.A.7.0.0.0179            stopped 
      nic       Release: 7.0 Build: GATEWAY.A.7.0.0.0170           disabled
      sae       Release: 7.0 Build: SAE.A.7.0.0.0166               running 
      www       Release: 7.0 Build: UMC.A.7.0.0.0169               disabled
      jps       Release: 7.0 Build: JPS.A.7.0.0.0172               disabled
      agent     Release: 7.0 Build: SYSMAN.A.7.0.0.0174            disabled
      webadm    Release: 7.0 Build: WEBADM.A.7.0.0.0173            disabled
    3. Use the show system information command to view general system information.
      user@host> show system information
      System Identification
      Hostname         myCSeriesController
      Manufacturer     Juniper Networks
      Product Name     C-2000
      Version          1.0
      Serial Number    0207082006000001
      UUID             48384441-5254-0030-4859-0030485977EE
      Hostid           e30a2e07
      Software version SRC Release 2.0 
      System Time
      Current time              2006-12-19 13:52:26 EST
      Uptime                    21:30
      Number of active users    3
      Load Averages (1m/5m/15m) 0.02/0.07/0.02
      Memory
      Total 15G
      Free  14G
      CPU Info
      Number of CPU Core(s) 4
      CPU Model     Dual Core AMD Opteron(tm) Processor 265
      Clock Speed   1804.132 MHz
      Disk Information
        Mountpoint       Total Used  Use%
        /                2015M  955M  47%
        /altroot         2015M   35M   1%
        /altvar            29G   75M   0%
        /boot              98M   14M  14%
        /var               31G  829M   2%
      Temperature
      System         30.000 degrees C
      Physical CPU-1 34.000 degrees C
      Physical CPU-2 29.000 degrees C
      
      Fan Speed
      Fan-1 9375 RPM
      Fan-2 9375 RPM

    Published: 2014-12-09