Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring System Information for the SRC SNMP Agent (SRC CLI)

    Use the following configuration statements to configure information supplied by the SRC SNMP agent:

    snmp { contact contact;name name;location location;description description;address [address...]; }

    To configure properties for the SRC SNMP agent:

    1. From configuration mode, access the configuration statement that configures the SRC SNMP agent.
      [edit]user@host# edit snmp
    2. (Optional) Specify the administrative contact for the system being managed by SNMP.
      [edit snmp] user@host# set contact contact
    3. (Optional) Specify the name of the system being managed by SNMP.
      [edit snmp] user@host# set name name
    4. (Optional) Specify the location of the system being managed by SNMP.
      [edit snmp] user@host# set location location
    5. (Optional) Specify the description of the system being managed by SNMP.
      [edit snmp] user@host# set description description
    6. (Optional) Specify the listening address on which to receive incoming SNMP requests.
      [edit snmp] user@host# set address [address...]

      To list more than one IP address, enter the addresses separated by spaces within brackets. By default, the SRC SNMP agent listens on all IPv4 interfaces.

    7. (Optional) Verify your configuration.
      [edit snmp] 
      user@host# show 

      If you did not configure the SNMP agent, the command displays only the SRC SNMP agent configuration.

    Published: 2014-12-10