Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Application Protocol Conditions (C-Web Interface)

    You can define application protocols for the stateful firewall and NAT services to use in match condition rules. An application protocol defines application parameters by using information from network layer 3 and above. Examples of such applications are FTP and H.323.

    To create and configure an application protocol condition:

    1. In the side pane, select an ASP policy rule.
    2. From the Create new list, select Traffic Condition. Type a name for the traffic condition, and click OK.
    3. Enter information as described in the Help text in the main pane, and click Apply.
    4. From the Create new list, select Application Protocol Condition. Type a name for the application protocol condition, and click OK.
    5. Enter information as described in the Help text in the main pane, and click Apply.
    6. (Optional) To configure protocol attributes:
      1. In the side pane, expand the application protocol condition, and select Proto Attr.
      2. Click Create, enter information as described in the Help text in the main pane, and click Apply.
    7. (Optional) To configure source ports:
      1. In the side pane, expand Proto Attr>Destination Port, and select Port.
      2. Click Create, enter information as described in the Help text in the main pane, and click Apply.
    8. (Optional) To configure destination ports:
      1. In the side pane, expand Proto Attr>Source Port, and select Port.
      2. Click Create, enter information as described in the Help text in the main pane, and click Apply.

    Published: 2014-12-10