Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Basic Local Properties

    In most cases you can use the default operating properties. Change the default properties if needed for your environment.

    Use the following configuration statements to configure basic local properties for a component:

    slot number component-name { base-dn base-dn ; java-runtime-environment java-runtime-environment ; java-heap-size java-heap-size ; snmp-agent; }

     

    To review the default local configuration and then change values:

    1. From configuration mode, access the configuration statement that specifies the slot configuration for a component.
      [edit]user@host# edit slot number nic

      For example:

      [edit]user@host# edit slot 0 nic
    2. To view the default configuration, run the show command. For example:
      [edit slot 0 nic]
      user@host# show
      base-dn o=umc;
      java-runtime-environment ../jre/bin/java;
      java-heap-size 128m;
      hostname DemoHost;
      initial { 

      Note: The hostname statement is specific to the NIC.

    3. (Optional) If you store data in the directory in a location other than the default, o=umc, change this value.
      [edit slot 0 nic]user@host> set base-dn base-dn
    4. (Optional) If you encounter problems caused by lack of memory, change the maximum memory size available to the JRE.
      [edit slot 0 nic]user@host> set java-heap-size java-heap-size
    5. (Optional) Enable viewing of SNMP counters through an SNMP browser.
      [edit slot 0 nic]user@host> set snmp-agent

     

    Published: 2014-12-10