Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Adding the Router Running Junos OS as a DMI Network Device (SRC CLI)

    Use the following configuration statements to configure the SAE to manage the DMI-enabled router running Junos OS:

    shared network device name {description description;management-address management-address;device-type (junose | junos-ise | junos-ptsp | junos |junos-dmi | pcmm | third-party);interface-classifier interface-classifier ;}

    To add the router running Junos OS as a DMI network device:

    1. From configuration mode, access the configuration statements that configure network devices. You must specify the name of a device with lowercase characters. This procedure uses r1-dmi as the name of the router.
      user@host# edit shared network device r1-dmi
    2. (Optional) Add a description for the router.
      [edit shared network device r1-dmi] user@host# set description description
    3. (Optional) Add the IP address of the router.
      [edit shared network device r1-dmi] user@host# set management-address management-address
    4. (Optional) Specify the device type as DMI.
      [edit shared network device r1-dmi] user@host# set device-type junos-dmi
    5. Configure an interface classifier for the network device. For more information about interface classifiers, see the SRC PE Subscribers and Subscriptions Guide.
      [edit shared network device r1-dmi] user@host# set interface-classifier interface-classifier
    6. (Optional) Verify your configuration.
      [edit shared network device r1-dmi] 
      user@host# show 
      description "Juniper Networks";
      management-address 10.10.8.27;
      device-type junos-dmi;
      interface-classifier {
       rule rule-0 {
          script #;
        }
      }

    Published: 2014-12-10