Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Allowing Multiple Logins from the Same IP Address (SRC CLI)

    You can specify whether the service activation engine (SAE) allows a login from the same IP address, provided that the previous session logs out first.

    • If you enable this setting, the SAE logs in the new subscriber session and automatically logs out the previous session.
    • If you disable this setting, the SAE denies login requests if a subscriber session for an IP address is active.

    Use the following configuration statement to specify whether or not the SAE allows multiple logins from the same IP address:

    shared sae configuration subscriber-sessions {allow-same-ip-login;}

    To specify whether the SAE allows a login from the same IP address, provided that the previous session logs out first:

    1. From configuration mode, access the subscriber sessions statement.
      user@host# edit shared sae configuration subscriber-sessions
    2. (Optional) Enable the SAE to allow a login from the same IP address, provided that the previous session logs out first.
      [edit shared sae configuration subscriber-sessions] user@host# set allow-same-ip-login
    3. (Optional) Verify your configuration.
      [edit shared sae configuration subscriber-sessions]
      user@host# show 
      allow-same-ip-login;
      assigned-ip-idle-timeout 900;

    Published: 2014-06-12