Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring General Properties for the SRC SNMP Agent (SRC CLI)

    Use the following configuration statements to configure general properties for the SRC SNMP agent:

    snmp agent { trap-history-limit trap-history-limit;component-polling-interval component-polling-interval;protocol-log-level protocol-log-level; }

    To configure properties for the SRC SNMP agent:

    1. From configuration mode, access the configuration statement that configures the SRC SNMP agent.
      [edit]user@host# edit snmp agent
    2. (Optional) Specify the maximum number of elements stored in the SNMP trap history table.
      [edit snmp agent] user@host# set trap-history-limit trap-history-limit
    3. (Optional) Specify the interval at which an SRC component is polled.
      [edit snmp agent] user@host# set component-polling-interval component-polling-interval
    4. (Optional) Specify the log level for SNMP requests and responses received from the master agent.
      [edit snmp agent] user@host# set protocol-log-level protocol-log-level

      To enable packet-level logging, set the protocol-log-level option to 9 or less.

    5. (Optional) Verify your configuration.
      [edit snmp agent] 
      user@host# show 

      The output indicates the trap history limit, the component polling interval, the protocol log level, the initial properties, the logging destinations, and the Java heap size.

    Published: 2014-06-12