Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring IMS for Failover (SRC CLI)

    Use the following configuration statements to configure IMS for failover:

    shared ims configuration redundancy { state-synchronization; state-sync-bulk-size state-sync-bulk-size; state-synchronization-timeout state-synchronization-timeout ; }

    To configure state synchronization with the SAE:

    1. From configuration mode, access the statement that configures redundancy for IMS.
      user@host# edit shared ims configuration redundancy
    2. (Optional) Enable state synchronization from the SAE.
      [edit shared ims configuration redundancy]user@host# set state-synchronization
    3. (Optional) Specify the number of events the SAE sends to IMS at one time during state synchronization.
      [edit shared ims configuration redundancy]user@host# set state-sync-bulk-size state-sync-bulk-size
    4. (Optional) Specify the time to wait for the first full synchronization request from the SAE after starting or restarting IMS.
      [edit shared ims configuration redundancy]user@host# set state-synchronization-timeout state-synchronization-timeout

    Published: 2014-06-12