TechLibrary

Table of Contents

Guide That Contains This Content

[+] Expand All

[-] Collapse All

Expressions in Parameters

An expression in a parameter definition can take one the following values:

An explicit value; for example, 1000000
Another parameter; for example, a parameter called bodDestPort
A mathematical expression that can include a combination of:
- Parameters
- Numbers—Integers and floating point numbers
- Strings
- IPv4 addresses
- Ranges of numbers, strings, and addresses
- Lists of values, such as lists of protocols
- Maps—List of pairs of attributes and corresponding values
- One keyword, not
- Separators
- Operators
  For example, x == 1 ? rate : 2*rate

The syntax for mathematical expressions is based primarily on Java syntax, although a few items use a proprietary syntax. When evaluating mathematical expressions, the SRC software:

Follows a defined order for the precedence of operators.
Performs all evaluations in long integer format until it finds an argument or result that is in Java floating point number format. Subsequently, the software performs evaluations in Java double floating point number format.
Evaluates only subordinate expressions that meet the conditions for evaluation.
- Evaluates only subordinate expressions that contain numbers and not parameters.
- Stops the evaluation and substitutes the partial evaluation if an argument in double floating number format becomes an argument to an operator that takes only integers.
Behaves in the same way as a Java evaluation if intermediate evaluations exceed or fall below the long integer range or the double floating point number range.
Follows the Java rules for raising exceptions. For example, the software raises an exception if:
- An evaluation involves a division by zero.
- Literal numbers exceed the long integer limit or the double floating point number limit.

The following sections describe how to format the items that you can use in an expression.

Specifying Parameter Names

Observe the following rules when you are specifying parameter names:

Enter a string of alphanumeric characters starting with a letter.
Do not use spaces or special characters. For example, do not use the at sign (@) in a parameter name.
You can use the underscore (_) and the dollar sign ($). Use the dollar sign to encode special characters by entering the Unicode equivalent of the character in hexadecimal format after the dollar sign. For example, use $0040 to encode the at sign (@).

Formatting Numbers

Observe the following rules when you are formatting numbers:

Enter a digit after the decimal point in a floating point number. For example, you can use the number 4.0, but not the number 4.
Do not enter characters that specify the type of number after that number. For example, do not enter the character L after a number to indicate that the number is a long integer.

Formatting Strings

Use Java syntax for strings; enclose strings in double quotation marks.

Example—“engineering”

Observe the following rules when you are formatting strings:

Do not use octal escape sequences in strings. For example, do not use the escape sequence \137 in a string.
Do not use Unicode escape sequences. For example, do not use the escape sequence \u80A6 in a string.

Using IPv4 Addresses

Use the following format for IP addresses:

<string>.<string>.<string>.<string> | ‘<string>.<string>.<string>.<string>’<string> is a set of digits in the range 0–255Example—‘192.0.2.1’

Single quotation marks around an item indicate that it represents an address; however, for IPv4 addresses, the quotation marks are optional.

Specifying Ranges

To specify a range of numbers, strings, and addresses, use two dots between the arguments.

Example—192.0.2.1..192.0.3.1

Formatting Lists

To specify a list of values, enclose a set of subordinate expressions separated by commas in a pair of square brackets.

Example—[ip, icmp, ftp]

Formatting Maps

Maps are used to specify values that have optional and interdependent attributes. For example, when you define an application object through the Enterprise Manager portal, you can select a number of attributes and specify particular values for them. Depending on the value of the attribute, other attributes are possible or required.

To format a map, specify a list of pairs of attributes and corresponding values. Separate the pairs with commas, and enclose the list in curly brackets (braces).

Example—{applicationProtocol="ftp” , sourcePort=123, inactivityTimeout=60}

Using Keywords

The SRC software ignores all Java keywords in substitutions, so that you can use Java keywords for identifiers such as variable names, function names, and attribute names in maps. The SRC software accepts one keyword, not, which is used to indicate conditions that do not match a specified value. For more information about the not keyword.

Using Separators

You cannot use a dot (.) as a separator. You can use other Java separators in the ways that Java supports.

Using Operators

Table 1 shows the operations and corresponding operators that the SRC software supports for substitutions. Most of the operators are Java operators, although a few operators are proprietary. You cannot use Java operators that do not appear in this table.

Table 1: Operations That You Can Use in Expressions

Operation	Operator	Number of Arguments	Result If Different from Java Conventions	Conditions for Evaluation	Example
Bitwise AND of the arguments	&	Two		Both arguments must be integers	234567 & 876543
Bitwise exclusive OR of the arguments	^	Two		Both arguments must be integers	234567 ^ 876543
Bitwise inclusive OR of the arguments	\|	Two		Both arguments must be integers	234567 \| 876543
Bitwise negation of the argument	~	One		Argument must be an integer	–234567
Difference between two arguments	–	Two		Both arguments must be numbers	876543 – 234567
Division of the first argument by the second argument	/	Two	Result of operation in double format	Both arguments must be numbers	589 / 756
Equal	==	Two	Nonzero number if the arguments are equal	Both arguments must be numbers	rate==5
Greater than	>	Two	Nonzero integer if the first argument is greater than the second argument	Both arguments must be numbers	rate>5
Greater than or equal to	>=	Two	Nonzero integer if the first argument is greater than or equal to the second argument	Both arguments must be numbers	rate>=5
If... then... else... operation	?:	Three	If the first argument is nonzero, then the result is the second argument, else the result is the third argument	First argument must be a number	“ x == 1 ? rate : 2*rate”
Less than	<	Two	Nonzero integer if the first argument is less than the second argument	Both arguments must be numbers	rate<5
Less than or equal to	<=	Two	Nonzero integer if the first argument is less than or equal to the second argument	Both arguments must be numbers	rate<=5
Logical AND	&&	Two	Nonzero integer if both the arguments are nonzero	Both arguments must be numbers	x == 1 && y >= 5
Logical NOT	!()	One	Zero if the argument is nonzero	All arguments must be numbers	! x ==y
Logical OR	\|\|	Two	Nonzero integer if at least one of the arguments is nonzero	Both arguments must be numbers	x==1 \|\| y>=5
Maximum of the arguments, max() = –infinity	max()	Zero or more		All arguments must be numbers	max (1, 3, 2, 4)
Minimum of the arguments, min() = +infinity	min()	Zero or more		All arguments must be numbers	min (1, 3, 2, 4)
Negation	–	One		Argument must be a number	–5
Not equal	!=	Two	Nonzero integer if the arguments are not equal	Both arguments must be numbers	rate !=5
Not match	not	One		None – expressions with this operator cannot be evaluated	not 192.0.2.1
Product of the arguments	*	Two		Both arguments must be numbers	rate*2
Raise the first argument to the power of the second argument	**	Two		Both arguments must be numbers	2**16
Range from the first argument to the second argument	..	Two		None—expressions with this operator cannot be evaluated	0..49
Remainder of division of the first argument by the second argument	%	Two		Both arguments must be integers	5%2
Round off the argument to the closest number	round()	One	Integer closest to the argument	Argument must be numbers	round(986532.654)
Round the argument down	floor()	One	Biggest integer less than or equal to the argument	Argument must be numbers	floor (986532.654)
Round the argument up	ceiling()	One	Smallest integer greater than or equal to the argument	Argument must be numbers	ceiling (986532.654)
Shift the first argument left by the number of bits in the second argument	<<	Two		Both arguments must be integers	986532 << 2
Shift the first argument right by the number of bits in the second argument	>>	Two		Both arguments must be integers	986532 >>2
Sum of the arguments	+	One or two		Both arguments must be numbers	876 + 345 +855

The precedence of the Java operators is the same as the precedence in Java; if you are unsure of the precedence of the operators, you can use parentheses to ensure that the software evaluates expressions in the desired way. For example, the following logical OR expression does not need parentheses.

x==1 || y>=5

You can, however, include parentheses as follows:

(x==1) || (y>=5)

The following list shows the precedence of the operators from lowest precedence to highest precedence:

not
..
?:
||
&&
|
^
&
==, !=
<,>,<=,>=
<<,>>
+,– (binary)
*,/,%
**
+,– (unary)
~,!