Allowing Multiple Logins from the Same IP Address (SRC CLI)

You can specify whether the service activation engine (SAE) allows a login from the same IP address, provided that the previous session logs out first.

• If you enable this setting, the SAE logs in the new subscriber session and automatically logs out the previous session.
• If you disable this setting, the SAE denies login requests if a subscriber session for an IP address is active.

Use the following configuration statement to specify whether or not the SAE allows multiple logins from the same IP address:

To specify whether the SAE allows a login from the same IP address, provided that the previous session logs out first:

1. From configuration mode, access the subscriber sessions statement.
   user@host# edit shared sae configuration subscriber-sessions
2. (Optional) Enable the SAE to allow a login from the same IP address, provided that the previous session logs out first.
   [edit shared sae configuration subscriber-sessions] user@host# set allow-same-ip-login
3. (Optional) Verify your configuration.

   [edit shared sae configuration subscriber-sessions]
   user@host# show 
   allow-same-ip-login;
   assigned-ip-idle-timeout 900;

Related Documentation

• Allowing Multiple Logins from the Same IP Address (C-Web Interface)
• Static IP Subscribers
• Setting Timeouts for Assigned IP Subscriber Sessions