Configuring Resolution Information for a NIC Proxy (SRC CLI)
Use the following statements to configure resolution information for a NIC proxy:
nic-proxy-configuration name resolution {resolver-name resolver-name; key-type key-type; value-typevalue-type; expect-multiple-values; constraints constraints; }
To configure resolution information for a NIC proxy:
- From configuration mode, access the configuration statement
that specifies the NIC proxy configuration. [edit]user@host# component-hierarchy nic-proxy-configuration name resolution
For example:
[edit]user@host# edit shared sae configuration nic-proxy-configuration ip resolution - Specify the NIC resolver that this NIC proxy uses.[edit shared sae configuration nic-proxy-configuration ip resolution]user@host# set resolver-name resolver-name
This resolver must be the same as one that is configured on the NIC host. For example:
[edit shared sae configuration nic-proxy-configuration ip resolution]user@host# set resolver-name /realms/ip/A1 - Specify the NIC data type that the key provides for the
NIC resolution.[edit shared sae configuration nic-proxy-configuration ip resolution]user@host# set key-type key-type
For example:
[edit shared sae configuration nic-proxy-configuration ip resolution]user@host# set key-type ipTo qualify data types, enter a qualifier within parentheses after the data type; for example, to specify username as a qualifier for the key LoginName:
[edit shared sae configuration nic-proxy-configuration ip resolution]user@host# set key-type LoginName (username) - Specify the type of value to be returned in the resolution
for the application that uses the NIC proxy.[edit shared sae configuration nic-proxy-configuration ip resolution]user@host# set value-type value-type
For example:
[edit shared sae configuration nic-proxy-configuration ip resolution]user@host# set value-type SaeId - (Optional) If the key can have more than one value, specify
that the key can have multiple corresponding values.[edit shared sae configuration nic-proxy-configuration ip resolution]user@host# set expect-multiple-values
- (Optional. Available at the Advanced editing level.) If
the application provides a constraint in the resolution request, specify
the data type for the constraint. The constraint represents a condition
that must or may be satisfied before the next stage of the resolution
process can proceed. [edit shared sae configuration nic-proxy-configuration ip resolution]user@host# set constraints constraints