Configuring the SAE for a Cable Network Environment (SRC CLI)
The tasks to configure the SAE for a cable network environment are:
Configure the SAE to manage PCMM devices.
Configure the session store.
Set up SAE communities.
(Optional) Configure SAE properties for the event notification API.
See Configuring SAE Properties for the Event Notification API (SRC CLI) (if you are using an external address manager).
(Optional) Configure record-keeping server peers for plug-ins.
See Configuring Record-Keeping Server Peers for Plug-Ins (SRC CLI) (if you are using the RKS plug-in).
(Optional) Configure PCMM record-keeping server plug-ins.
See Configuring PCMM Record-Keeping Server Plug-Ins (SRC CLI) (if you are using the SAE’s embedded policy server).
(Optional) Configure CMTS-specific RKS plug-ins.
In addition to configuring the SAE, you need to:
Configure the CMTS device in the directory (if you are using the SAE’s embedded policy server).
Configure the NIC (if you are using assigned IP subscribers).
Enable the Common Open Policy Service (COPS) interface on the CMTS device. See the documentation for your CMTS device for information about how to do this.