Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring JunosE Secondary Input Policy Conditions (SRC CLI)

 

For JunosE policies, you can apply secondary input policies to the input (ingress) side of the router interface. Secondary input policies evaluate conditions after a route lookup.

Use the following configuration statements to configure match conditions for JunosE secondary input policies:

To add conditions for JunosE secondary input policies to a classify-traffic condition:

  1. From configuration mode, create a classify-traffic condition inside a policy rule that has already been created and configured for a policy list whose type is junose-ipv4 or junose-ipv6 and applicability is secondary-input. For example, to create a traffic-condition called rtcl within policy rule clacl:

  2. (Optional) Configure the condition to match packets based on the source route class.

  3. (Optional) Configure the condition to match packets based on the destination route class.

  4. (Optional) Configure the condition to match packets based on the traffic class.

  5. (Optional) Configure the condition to match packets based on the packet color.

  6. (Optional) Configure the condition to match packets based on the user packet class action number.

  7. (Optional) Configure the condition to match packets based on packets destined for a local interface.

  8. (Optional) Verify the secondary input policy configuration.