Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring Rate-Limit Actions (SRC CLI)

 

Use this action to define the quality of service. You can configure rate-limit actions for JunosE policy rules.

The type of action that you can create depends on the type of policy rule. See Policy Information Model.

Use the following configuration statements to configure rate-limit actions:

To configure a rate-limit action:

  1. From configuration mode, enter the rate-limit action configuration.

  2. (Optional) Specify that the rate-limit profile is either one rate or two rate. The rate-limit type determines the options that you can configure for a rate-limit action.

  3. (Optional) Configure the target rate for the traffic that the policy covers.

  4. (Optional) Configure the amount of bandwidth allocated to burst traffic in bytes.

  5. (Optional) For two-rate rate-limit profiles, specify the amount of bandwidth allocated to excess traffic flow over the committed rate.

  6. (Optional) For two-rate rate-limit profiles, specify the amount of bandwidth allocated to burst traffic in excess of the peak rate.

  7. (Optional) For one-rate rate-limit profiles, specify the amount of bandwidth allocated to accommodate burst traffic.

  8. (Optional) Set the rate limit to color aware for the rate-limit to process color values.

  9. (Optional) Set the rate limit to support hierarchical rate limits.

  10. (Optional) Configure the rate-limit action for traffic flows that:

    • Do not exceed the committed rate

  11. (Optional) Enter a description for the rate-limit action.

  12. (Optional) Return to the rate-limit action configuration, and verify the configuration.