Configuring IPMI (SRC CLI)
For the C3000 and C5000 models, an IPMI configuration includes an IP address assigned to the IPMI interface and a gateway IP address.
The configuration statements under the edit system ipmi hierarchy are not supported, if the SRC software is deployed as a virtual machine.
Use the following configuration statements to configure an IPMI interface on a C Series Controller:
system ipmi {
address address;
gateway gateway;
user name;
}
To configure IPMI on an interface:
- From configuration mode, access the configuration statement
that configures an IPMI interface.user@host# edit system ipmi
- Set the IP address.[edit system ipmi]user@host# set address address/destination prefix
An IP address is required for both the C3000 and C5000 models.
- Set the default gateway IP address. A default gateway
is a node on a network that serves as an access point to another network.[edit system ipmi]user@host# set gateway gateway
- Verify the configuration.[edit system ipmi]user@host# showaddress 10.227.7.145/24;gateway 10.227.7.1;