Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring Dictionaries for the SIC Group (SRC CLI)

 

You can add new attributes or modify the current attributes in an SIC dictionary. To add or modify an attribute in a dictionary, specify the unique name of the attribute and configure the RADIUS properties of the attribute.

Note

To create a new dictionary, we recommend that you work with Juniper Networks Technical Support.

Use the following statements to configure attributes in an SIC dictionary:

To add or modify attributes in an SIC dictionary:

  1. From configuration mode, access the statement that specifies the unique name for the dictionary. This sample procedure uses group1 as the group identifier and dic1 as the dictionary identifier.

  2. Specify the unique name for the attribute you want to add or modify in the dictionary.

  3. Specify that the attribute is a RADIUS attribute.

  4. Specify the attribute type.

  5. Specify the format of the RADIUS attribute.

    where:

    • one-byte-integer—Attribute value is an 8-bit unsigned integer.

    • integer—Attribute value is a 32-bit unsigned integer.

    • eight-byte-integer—Attribute value is a 64-bit unsigned integer.

    • string—Attribute value is a string.

    • ipv4-address—Attribute value is an IPv4 address.

    • ipv6-address—Attribute value is an IPv6 address.

    • time—Attribute value is a 32-bit unsigned value, with the most significant octet appearing first. The value is equal to the number of seconds since 00:00:00 UTC, January 1, 1970.

    • octets—Attribute value consists of raw bytes.

  6. (Optional) Specify the vendor ID for the attribute.

  7. (Optional) Specify whether the attribute should be encrypted without the salt.

  8. (Optional) Specify whether the attribute should be encrypted with the salt.

  9. (Optional) Specify whether the RADIUS attribute is tagged.

  10. (Optional) Specify whether the RADIUS attribute carries sensitive data, so its value will not be logged.

  11. (Optional) Specify the name and value of the constant you want to associate with the data contained in the RADIUS attribute.

  12. (Optional) If you modify an existing dictionary, you need to restart the SIC.