Viewing Statistics About Filtered Traffic (SRC CLI)
You can obtain information about the packets filtered on a C Series Controller by accessing statistics for the iptables Linux tool. You can also reset the counters for this tool.
To view information about packet filtering on a C Series Controller:
user@host> show iptables <nat | filter | mangle> <reset-counters>
nat—Displays information for the nat table for the iptables tool. The nat table provides rules for rewriting packet addresses.
filter—Displays information for the filter table for the iptables tool. The filter table provides rules for defining packet filters.
mangle—Displays information for the mangle table for the iptables tool. The mangle table provides rules for adjusting packet options, such as quality of service.
user@host> show iptables
Chain INPUT (policy ACCEPT 25M packets, 9401M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 24M packets, 4506M bytes) pkts bytes target prot opt in out source destinationreset-counters
To reset the values in the output for the show iptables command: