Configuring the SRC 3GPP Gateway (SRC CLI)

To configure the SRC 3GPP gateway:

1. Configure initial properties, including the connection to the directory and directory- monitoring properties.

   See Configuring Initial Properties for the SRC 3GPP Gateway (SRC CLI).

   See Changing the Location of Data in the Directory.

   See Configuring Directory-Connection Properties for the SRC 3GPP Gateway (SRC CLI).

   See Configuring Initial Directory-Eventing Properties for the SRC 3GPP Gateway (SRC CLI).

2. Configure the connection to the PCRF (remote Diameter peer).

   See Configuring Diameter Peers (SRC CLI).

3. Configure the SRC 3GPP gateway Gx interface.

   See Configuring the SRC 3GPP Gateway Gx Interface (SRC CLI).

4. Configure the basic local properties for the SRC 3GPP gateway.

   See Configuring Basic Local Properties for the SRC 3GPP Gateway (SRC CLI).

5. Configure the object adapter Internet address.

   Configuring the Object Adapter Internet Address for the SRC 3GPP Gateway (SRC CLI).

6. Configure logging destinations.

   See Configuring Logging Destinations to Store Messages in a File (SRC CLI).

   See Configuring Logging Destinations to Send Messages to the System Logging Facility (SRC CLI).

7. Create an SRC 3GPP gateway grouped configuration.

   See Creating Grouped Configurations for the SRC 3GPP Gateway (SRC CLI).

8. Configure subscriber types.

   See Configuring the Subscriber Type (SRC CLI).

9. Configure the NIC proxies.

   See Configuring a NIC Proxy for the SRC 3GPP Gateway (SRC CLI).

10. Start the SRC 3GPP gateway.

    See Starting the SRC 3GPP Gateway (SRC CLI).

11. Configure the SAE for the SRC 3GPP gateway.

    See Configuring the SAE for the SRC 3GPP Gateway.