Adding Enterprises (SRC CLI)
Use the following configuration statements to add an enterprise subscriber:
To add an enterprise subscriber:
From configuration mode, enter the enterprise subscriber configuration. In this procedure, ABCInc is the name of the enterprise subscriber.
user@host# edit subscribers retailer default subscriber-folder local enterprise ABCInc(Optional) Configure the name that is displayed in enterprise management portals, if different from the enterprise name.
[edit subscribers retailer default subscriber-folder local enterprise ABCInc]user@host# set display-name display-name(Optional) Configure the name that identifies the enterprise in accounting records.
[edit subscribers retailer default subscriber-folder local enterprise ABCInc]user@host# set accounting-user-id accounting-user-id(Optional) Enter a description of the enterprise.
[edit subscribers retailer default subscriber-folder local enterprise ABCInc]user@host# set description description(Optional) Assign service scopes to the enterprise.
[edit subscribers retailer default subscriber-folder local enterprise ABCInc]user@host# set scope [ scope... ](Optional) Configure the actual values for parameters associated with this enterprise.
[edit subscribers retailer default subscriber-folder local enterprise ABCInc]user@host# set substitution [ substitution... ](Optional) Verify your configuration.
[edit subscribers retailer default subscriber-folder local enterprise ABCInc] user@host# show display-name ABCInc; description "This enterprise is sample data for use with JunosE routers. The attached EntJunose scope contains enterprise services that are designed to work with JunosE. scope [ EntJunose POP-Ottawa POP-Boca POP-Boston POP-Montreal ]; substitution [ "acct : network = 208.93.36.80 / 28" "eng : network = 208.93.36.64 / 28" ];
Configure an access subscription for the enterprise. (See Configuring Accesses (SRC CLI).)