Adding a Normal Service (SRC CLI)

Use the following configuration statements to add normal services to the global service scope:

Use the following configuration statements to add normal services to a service scope:

To add a normal service:

1. From configuration mode, enter the service configuration. In this sample procedure, the service is configured in the global service scope, and Video-Gold is the name of the service.

2. (Optional) Enter a description for the service.

3. Configure the type of service.

4. (Optional) Configure the category of the service for other SRC applications, such as portals.

5. (Optional) Configure the link used in SRC applications, such as portals.

6. (Optional) Configure the policy group that is applied when the service is activated.

7. (Optional) Enable authentication required for services activated by portals.

8. (Optional) Configure the plug-in(s) used to authorize the service.

9. (Optional) Configure the plug-in(s) used to collect accounting data for the service.

10. (Optional) Configure the time after which the service session is deactivated.

11. (Optional) Configure the idle time after which the SAE deactivates service. You cannot configure the idle timeout input and the idle timeout output when the idle timeout is configured. Likewise, you cannot configure the idle timeout when the idle timeout input and the idle timeout output are configured. However, you can configure both the idle timeout input and the idle timeout output at the same time.

12. (Optional) Configure the input traffic direction while the SAE verifies the idle timeout. You cannot configure the idle timeout input and the idle timeout output when the idle timeout is configured. Likewise, you cannot configure the idle timeout when the idle timeout input and the idle timeout output are configured.

13. (Optional) Configure the output traffic direction while the SAE verifies the idle timeout. You cannot configure the idle timeout input and the idle timeout output when the idle timeout is configured. Likewise, you cannot configure the idle timeout when the idle timeout input and the idle timeout output are configured.

14. (Optional) Configure the time between interim accounting messages.

15. (Optional) Configure the value of the RADIUS class attribute in accounting messages.

16. (Optional) Configure the status of the service.

17. (Optional) Configure whether the SAE can deactivate this service

18. (Optional) Enable automatic activation when the service is subscribed.

19. (Optional) Specify whether a subscriber can activate a service.

20. (Optional) Specify whether the service is visible only to administrators who have permission to see secret information.

21. (Optional) Verify your configuration.