Configuring IGMP Conditions (SRC CLI)
Use the following configuration statements to add IGMP conditions to a classify-traffic condition:
Because the protocol is already set to IGMP, do not change the protocol or protocol-operation options.
To add IGMP conditions to a classify-traffic condition:
From configuration mode, enter the IGMP configuration. For example:
user@host# edit policies group junose list pl rule pr traffic-condition ctc igmp-condition(Optional) Configure the value of the IP flags field in the IP header.
[edit policies group junose list pl rule pr traffic-condition ctc igmp-condition]user@host# set ip-flags ip-flags(Optional) Configure the mask that is associated with the IP flag.
[edit policies group junose list pl rule pr traffic-condition ctc igmp-condition]user@host# set ip-flags-mask ip-flags-mask(Optional) Configure the value of the fragment offset field.
[edit policies group junose list pl rule pr traffic-condition ctc igmp-condition]user@host# set fragment-offset fragment-offset(Optional) Configure the packet length on which to match. The length refers only to the IP packet, including the packet header, and does not include any layer 2 encapsulation overhead.
[edit policies group junose list pl rule pr traffic-condition ctc igmp-condition]user@host# set packet-length packet-length(Optional) Configure the IGMP packet type on which to match.
[edit policies group junose list pl rule pr traffic-condition ctc igmp-condition]user@host# set igmp-type icmp-type(Optional) Verify the IGMP condition configuration.
[edit policies group junose list pl rule pr traffic-condition ctc igmp-condition] user@host# show protocol igmp; protocol-operation 1; ip-flags 0; ip-flags-mask 0; fragment-offset 0; igmp-type igmpType;