Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Adding the Routers Acting as a PCEF and Running Junos OS (SRC CLI)

 

Use the following configuration statements to add and configure the router (Services Control Gateway) running Junos OS and acting as a PCEF:

To configure the router (Services Control Gateway) acting as a PCEF:

  1. From configuration mode, access the configuration statements that configure network devices. You must specify the name of a device with lowercase characters. This procedure uses gx.englab.juniper.net as the name of the router.

  2. Set the type of device to junos-gx.

  3. Specify the configured peers associated with the device. See Configuring Diameter Peers (SRC CLI).

  4. From configuration mode, access the configuration statements for virtual routers. You must specify the name of a device with lowercase characters.

    Note

    For the Gx router driver, you can create only one virtual router with the name set to wildcard ’*’.

  5. Specify the SAEs that can manage this router.

  6. (Optional) From configuration mode, access the configuration statements that configure charging information for the Services Control Gateway.

  7. (Optional) Specify the address of the primary online charging system.

  8. (Optional) Specify the address of the secondary online charging system.

  9. (Optional) Specify the address of the primary offline charging system.

  10. (Optional) Specify the address of the secondary offline charging system.

  11. (Optional) Verify your configuration.