Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

 

Configuring Access to Subscriber Data (SRC CLI)

 

Use the following configuration statements to configure access to subscriber data:

To configure SAE access to subscriber data:

  1. From configuration mode, access the configuration statement that configures SAE access to subscriber data in the directory. In this sample procedure, the subscriber data is configured in the se-region group.

  2. Select the filter that the SAE uses to search for subscriptions in the directory when the SAE loads a subscription to a subscriber reference filter. By default, the SAE uses subscriber reference filter to search for subscriptions.

    Note

    You must define the SubscriberRef attribute in Juniper Networks database when the SAE uses subscriber reference filter for subscriptions; otherwise, the subscriber data is not loaded.

  3. (Optional) Enable loading of subscriber schedules.

  4. Specify the subtree in the directory in which subscriber information is stored.

  5. Specify the subtree in the directory in which persistent session data is cached.

  6. (Optional) Specify the directory server that stores subscriber information.

  7. Specify the subtree in the directory where subscriber data is cached.

  8. (Optional) Specify the DN that the SAE uses to authenticate access to the directory server.

  9. (Optional) Specify the password used to authenticate access to the directory server.

  10. (Optional) Enable automatic discovery of changes in subscriber profiles.

  11. Set the frequency for checking the directory for updates.

  12. Enable LDAPS as the secure protocol for connections to the server that stores subscriber data.

  13. (Optional) Verify your configuration.