Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Disconnecting from a Serial Console Using IPMI Serial over LAN (SOL) (SRC CLI)

    Only one IPMI SOL connection is allowed per IPMI interface. You can close the active IPMI connection to a local host or a remote host.

    To disconnect from a local host using IPMI SOL:

    • From operational mode, enter the ipmisol close local-session command to close the active IPMI connection to a local host.

      Note: The ipmisol close local-session command is not supported, if the SRC software is deployed as a virtual machine.

      user@host>ipmisol close local-session host

    To disconnect from a remote host using IPMI SOL:

    • From operational mode, enter the ipmisol close remote-session command to close the active IPMI connection to a remote host.
      user@host>ipmisol close remote-session host host user user
      • host—IP address of the remote host IPMI interface.
      • user—IPMI username configured in the remote host.

      For example:

      user@host>ipmisol close remote-session host 10.10.10.30 user johndoe

    Modified: 2015-06-17