Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring the RADIUS Transport for an SIC Server (SRC CLI)

    You need to configure both the inbound and outbound RADIUS transport for each server in the SIC group. Servers use the same inbound and outbound transport names that are configured for the SIC group.

    Use the following statements to configure the RADIUS transport options for the SIC server:

    shared sic group identifier server identifier transport transport-name
    shared sic group identifier server identifier transport transport-name { address address; }
    shared sic group identifier server identifier outbound-transport transport-name
    shared sic group identifier server identifier outbound-transport transport-name { address address; }

    To configure the RADIUS transport options for the SIC server:

    1. From configuration mode, access the statement that configures the RADIUS inbound transport options for the server. For example, if the accounting listener transport for the group is configured as trpin1, specify the server inbound transport as trpin1.
      [edit]user@host# edit shared sic group group1 server server1 transport trpin1
    2. (Optional) Specify the IP address used by the server for receiving UDP packets.
      [edit shared sic group group1 server server1 transport trpin1]user@host# set address address
    3. Specify the RADIUS outbound transport options for the SIC server. For example, if the outbound transport for the SIC group is set to trpout1, set the server outbound transport to trpout1.
      [edit]user@host# edit shared sic group group1 server server1 outbound-transport trpout1
    4. (Optional) Specify the IP address used by the server when sending outbound requests.
      [edit shared sic group group1 server server1 outbound-transport trpout1]user@host# set address address

    Modified: 2016-12-29