Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Configuring Next-Hop Actions (SRC CLI)

    Use this action for the ingress side of the interface to specify the next IP address where the classified packets should go. You can configure next-hop actions for Junos OS filters and JunosE policy rules.

    The type of action that you can create depends on the type of policy rule. See Policy Information Model.

    Use the following configuration statements to configure the next-hop action.

    policies group name list name rule name next-hop {next-hop-address next-hop-address ; description description ; }

    To configure a next-hop action:

    1. From configuration mode, enter the next-hop action configuration.
      user@host# edit policies group junose list nexthop-to-ssp rule to-ssp next-hop
    2. (Optional) Configure the next IP address where the classified packets should go.
      [edit policies group junose list nexthop-to-ssp rule to-ssp next-hop]user@host# set next-hop-address next-hop-address
    3. (Optional) Enter a description for the next-hop action.
      [edit policies group junose list nexthop-to-ssp rule to-ssp next-hop]user@host# set description description
    4. (Optional) Verify the next-hop action configuration.
      [edit policies group junose list nexthop-to-ssp rule to-ssp next-hop]
      user@host# show 
      next-hop-address virtual_ipAddress;
      description "Next hop action";

    Modified: 2016-12-29