Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Configuring NTP Client Mode for a C Series Controller (SRC CLI)
Use the following configuration statements to configure NTP on a C Series Controller to operate in client mode:
system ntp server address{version version;prefer;}
To configure NTP to operate in client mode:
- From configuration mode, access the configuration statement
that configures an NTP server, and specify the IP address or hostname
of an NTP server.[edit system ntp]user@host# edit server address
For example, to specify an NTP server that has an IP address of 192.0.2.30:
[edit system ntp]user@host# edit server 192.0.2.30 [edit system ntp server 192.0.2.30]user@host# - (Optional) Specify the version of NTP to be used for outgoing
packets.[edit system ntp server address ]user@host# set version version
- (Optional) If you configure more than one time server,
specify whether this server is to be contacted first for synchronization.[edit system ntp server address ]user@host# set prefer
