Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Adding the Routers Acting as a PCEF and Running Junos OS (SRC CLI)

    Use the following configuration statements to add and configure the router (Services Control Gateway) running Junos OS and acting as a PCEF:

    shared network device name {device-type (junose | junos-ise | junos | pcmm | thirdparty | junos-gx);peers [peers...];}
    shared network device name virtual-router name {sae-connection [sae-connection...];}
    shared network device name charging-server-info {primary-event-charging-function primary-event-charging-function;sec-event-charging-function sec-event-charging-function;primary-charging-collection-function primary-charging-collection-function;sec-charging-collection-function sec-charging-collection-function;}

    To configure the router (Services Control Gateway) acting as a PCEF:

    1. From configuration mode, access the configuration statements that configure network devices. You must specify the name of a device with lowercase characters. This procedure uses gx.englab.juniper.net as the name of the router.
      [edit]user@host# edit shared network device gx.englab.juniper.net
    2. Set the type of device to junos-gx.
      [edit shared network device gx.englab.juniper.net]user@host# set device-type junos-gx
    3. Specify the configured peers associated with the device. See Configuring Diameter Peers (SRC CLI).
      [edit shared network device gx.englab.juniper.net]user@host# set peers [peers...]
    4. From configuration mode, access the configuration statements for virtual routers. You must specify the name of a device with lowercase characters.
      [edit]user@host# edit shared network device gx.englab.juniper.net virtual-router *

      Note: For the Gx router driver, you can create only one virtual router with the name set to wildcard ’*’.

    5. Specify the SAEs that can manage this router.
      [edit shared network device gx.englab.juniper.net virtual-router *]user@host# set sae-connection [sae-connection...]
    6. (Optional) From configuration mode, access the configuration statements that configure charging information for the Services Control Gateway.
      [edit]user@host# edit shared network device gx.englab.juniper.net charging-server-info
    7. (Optional) Specify the address of the primary online charging system.
      [edit shared network device gx.englab.juniper.net charging-server-info]user@host# set primary-event-charging-function primary-event-charging-function
    8. (Optional) Specify the address of the secondary online charging system.
      [edit shared network device gx.englab.juniper.net charging-server-info]user@host# set sec-event-charging-function sec-event-charging-function
    9. (Optional) Specify the address of the primary offline charging system.
      [edit shared network device gx.englab.juniper.net charging-server-info]user@host# set primary-charging-collection-function primary-charging-collection-function
    10. (Optional) Specify the address of the secondary offline charging system.
      [edit shared network device gx.englab.juniper.net charging-server-info]user@host# set sec-charging-collection-function sec-charging-collection-function
    11. (Optional) Verify your configuration.
      [edit shared network device gx.englab.juniper.net]
      user@host# show 
      device-type junos-gx;
      peers [peers...];
      virtual-router * {
        sae-connection [sae-connection...];
      }
      

    Modified: 2016-05-19