Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Configuring Information to Test the Network Publisher (C-Web Interface)
You can use an input file to verify that the network publisher is collecting information as configured or to set up a demonstration for an application.
To configure the network publisher to use an input file:
- Click Configure, expand Slot, expand the slot for which you want to configure
the network publisher, and then expand Network Publisher> Routers> Test Mode.
Or
Click Configure, expand Slot, expand the slot for which you want to configure the network publisher, and then expand Network Publisher> Routers> specific-router> Test Mode.
The Test Mode pane appears.
- Select Enable Input File.
