Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Specifying Policy Server Identifiers in Messages (SRC CLI)

    Use the following configuration statements to configure policy server identifiers for the JPS:

    slot number jps { policy-server-id policy-server-id; use-psid-in-gate-commands; }

    To configure policy server identifiers for the JPS:

    1. From configuration mode, access the configuration statement that configures the policy server identifiers.
      user@host# edit slot 0 jps
    2. (Optional) Specify the policy server identifier so that the JPS can be identified in messages sent to CMTS devices.
      [edit slot 0 jps] user@host# set policy-server-id policy-server-id
    3. (Optional) Configure the JPS so that the policy server identifier is specified in messages sent to the RKS.
      [edit slot 0 jps] user@host# set use-psid-in-gate-commands

      When the JPS is communicating only with PCMM I03 CMTS devices, the value must be true. When the JPS is communicating with any pre-PCMM I03 CMTS devices, the value must be false.

    4. (Optional) Verify your configuration.
      [edit slot 0 jps] 
      user@host# show 

    Modified: 2016-04-18