Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Connecting a C3000 or C5000 AC Power Cord

    To connect the AC power cord:

    1. Locate a replacement power cord with the type of plug appropriate to your geographical location (see C3000 and C5000 AC Power Cord Specifications).
    2. Plug the replacement power cord into the corresponding appliance inlet located in the chassis directly above the power supply.
    3. Insert the power cord plug into an external AC power source receptacle.

      Note: Each power supply must be connected to a dedicated AC power feed and a dedicated customer site circuit breaker. We recommend that you use a 5 A (110 VAC) minimum, or as required by local code.

    4. Dress the power cord appropriately. Verify that the power cord does not block the air exhaust and access to router components, or drape where people could trip on it.
    5. Observe the status LEDs on the power supply faceplate. If the power supply is correctly installed and functioning normally, the status LED lights green steadily.

    Published: 2014-06-12