Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Installing the C Series Controller in a Two-Post Rack
To install the C Series Controller in a two-post rack, you must attach the mounting hardware for center mounting. Center mounting allows the controller to be midmounted so that there is even clearance on the front and rear of the rack.
To mount the controller using the center-mount option:
- Remove the two front-mount rails from either side of the chassis.
- Insert one midmount bracket to the center on either side of the chassis.
- Attach the chassis to the equipment rack, and insert the other two midmount brackets on either side of the system to secure the chassis to the backs of the post (see Figure 1).
- Verify that the mounting screws on one side of the rack are aligned with the mounting screws on the opposite side and that the appliance is level.
Figure 1: Installing the C Series Controller in a Two-Post Rack
