Navigation
Table of Contents
Guide That Contains This Content
[+] Expand All
[-] Collapse All
Powering On the C Series C3000 or C5000 Controller
 | Caution: Evaluate the overall loading of the branch circuit before you install any equipment into a rack. |
To power on the system:
- Verify that the power source is operational and turned on.
- Inspect all power connections to the system.
- Confirm that all connections are secure.
- Push the momentary power switch on the rear panel.
The green status LED on the power supply turns on.
- Monitor the LEDs to verify that the system is booting
properly.
When the prompt appears on the system console, you can log in and configure the system.
