Help us improve your experience.

Let us know what you think.

Do you have time for a two-minute survey?

Navigation
Guide That Contains This Content
[+] Expand All
[-] Collapse All

    Installing the C Series Controller in a Four-Post Rack

    The C3000 and C5000 Controllers require additional support when mounted on the rack-mount system. This option is the default configuration.

    To install the mounting hardware for a four-post rack:

    1. Insert four rack-mount screws on each side of the system to secure the front of the chassis to the equipment rack.
    2. Slide the rear-mount rail brackets into the backs of the front rails on either side of the chassis, and align the brackets with your rear equipment rack posts. Secure the rear-mount rail brackets to your equipment rack with two rack mount screws each.
    3. Insert locking screws on the sides of the rear-mount brackets to secure the front and rear mounting brackets in place. See Figure 1.
    4. Verify that the mounting screws on one side of the rack are aligned with the mounting screws on the opposite side and that the appliance is level.

    Figure 1: Installing the C Series Controller in a Four-Post Rack

    Installing
the C Series Controller in a Four-Post Rack

    Published: 2014-06-12